Gansu production and sales sheet insurance seat belt

Safety belt Electrician's safety belt is a safety device used to prevent falls during electrician work.
The service life of seat belts is generally ~ years. If abnormalities are found, they should be scrapped in advance.
The belt and safety belt rope of the safety belt should have sufficient mechanical strength, the material should be wear-resistant, and the snap ring (hook) should have a safety device. Safety belt ropes with a length of more than 1 meter should be equipped with buffers.
A visual inspection should be carried out before using the safety belt
The components are complete and there are no shortages and no damage or damage
The rope braid has no brittle, broken strands or kinks
The metal fittings have no cracks and no welding defects. Seriously rusted
The hook tongue bite is flat and not in position, the safety device is complete and reliable
The rivets have no obvious deviation and the surface is smooth.
Seat belts should be fastened to solid objects and are not allowed to be hung on moving or unstable objects. Do not tie around sharp edges and corners. Seat belts must be hung high and tied parallel to each other. It is strictly prohibited to hang them low or use them high.
When working on a pole tower, the safety belt backup protection rope should be tied to a safe and strong component (live work depends on the specific task)
Safety belt
The service life of the safety belt is generally ~ years , if abnormalities are found, they should be scrapped in advance
The belt and safety belt rope of the seat belt should have sufficient mechanical strength, the material should be wear-resistant, and the snap ring (hook) should have a safety device. The length of the safety belt rope should be more than 1 meter. A buffer should be added
Appearance inspection should be carried out before using the safety belt
The components are complete and there are no shortages or damages
The rope braid has no brittle, broken strands or twists
There are no metal accessories There are no defects in the crack welding and no serious rust
The hook tongue bite is flat and well-positioned, and the safety device is intact
The rivets have no obvious deviation and the surface is smooth