Year1
- 胶布厚度：
- 0.45+0.05mm
Affordable price
<>
Product description
Air-tight heavy-duty chemical protective clothing is one of the protective clothing for firefighters. Protective clothing worn to protect oneself from dangerous chemicals or corrosive substances during fire fighting and rescue operations at fire scenes and accident sites containing dangerous chemicals and corrosive substances.
The main tape of the air-tight heavy-duty chemical protective clothing is made of brocade silk cloth treated with flame retardant and viscosity increasing, and is coated on both sides with flame-retardant and chemical-proof surface tape. The main tape only produces carbonization when exposed to fire and does not dissolve and drip. Can maintain good strength. The main tape is made into the main body of the garment and gloves through a laminating and sewing process, and is paired with flame-retardant, voltage-resistant and puncture-resistant boots or firefighting rubber boots to form a complete set of clothing.
Clothes size
Clothes length from collar to boot sole
Bust
Waist
Shoe size
Suitable for height
Life is like a mirror, it laughs when you laugh, and cries when you cry. With a happy heart, what you see is the grass growing and the orioles flying. Your heart is full of sadness, and what you see is the chilling and withering. Instead of worrying about what you can’t get, be grateful for what you already have.
br <>
Main technical parameters
Main body tape
Tape thickness +
Tensile strength in both long and weft directions is not less than/
Tear strength in trapezoidal method in both long and weft directions The average resistance is not less than
acid permeability,, impermeability
alkali permeability/impermeability
flame retardant performance, the continued burning time is not greater than the flame retardant time is not greater than the damage length is not greater
Heat aging resistance ℃, non-stick and non-brittle
Cold resistance ℃, no cracks when folded
Gasoline resistance, no cracks or stickiness when soaked in gasoline
The bonding strength between the adhesive layer and the fabric is not less than
The properties of fire-fighting rubber boots are shown in the table below
Fire-fighting rubber boots
Boot surface elongation at break
Boot sole puncture resistance
Boot sole wear resistance
Boot oil resistance
Upper sole, ~
Adhesion of adhesive strips
Boot sole withstand voltage
Boot surface torn off after aging Elongation
Steel liner corrosion resistance
Non-corrosion
Boot sole thermal insulation performance< br/>
℃
Anti-slip performance of boots
Weight
/> Leakage performance
Water immersed, impermeable
Finished product performance
Adhesion strength of strips
Not less than
Water resistance only/water nozzle flushing
No leakage
Quality
Not greater than
Instructions for use
Although wearing chemical protective clothing requires the help of a co-wearer and the wearer, the process of putting it on is quite simple. .
The wearer helps the wearer put on the breathing device, connect the air supply valve to the mask according to the instructions for use of the breathing device, and start the breathing device.
Adjust the strap of the respirator to the most comfortable state.
A long, heavy-duty airtight zipper extends from one side of the chemical protective suit down to the calf, then press the zipper with one hand to keep it straight while pulling the zipper with the other hand , unzip the zipper approximately 10 times at a time, until the zipper is completely open, and then fold the chemical protective suit down to expose the top of the chemical protective boots.
The wearer first puts on the chemical protective boots, then pulls up the chemical protective suit, puts the arms into the sleeves, and puts on the hood. With the help of the wearer, put on the mask and cover the head. The belt is fastened.
The wearer will zip the zipper according to the steps.
The heavy-duty air-tight zipper has a tower edge on the outside. After the zipper is zipped, close the tower edge to protect the zipper and extend its service life.
Fully sealed chemical protective clothing is used by firefighters to enter fire or accident sites with chemical hazards or corrosive items, as well as toxic and harmful gases or accident sites, find fire sources or accident points, rescue victims, and carry out fire fighting and rescue operations. protective clothing when wearing.
The air-tight heavy-duty chemical protective clothing produced by our company has been rigorously tested to ensure that it meets the European standards of B. The materials used have also been rigorously tested to ensure that they meet the requirements of the relevant provisions of B.
After you successfully place an order for the air-tight heavy-duty chemical protective clothing products provided by Jiangsu Youlong Rescue Equipment Co., Ltd., it means that you have become a respected customer of Youlong Rescue!
Friendly reminder within two days after you receive the goods!
It was found that the commercial air-tight heavy-duty chemical protective clothing had obvious manufacturing defects.
If the goods have been exchanged but still have quality problems, you can request a return!
When the customer receives the goods, he unpacks and inspects them in front of the deliveryman. If he finds that the goods have quality problems, he can ask for an exchange!
Contact person Wang Xia
Contact information
WhatsApp
