desks and chairs

Product name Fixed row of chairs
Medium product specifications
The support legs are made of oval steel pipes, which are bent into an arc shape by a pipe bending machine. The top is equipped with an engineering plastic inner sleeve to prevent it from falling off easily.
The foot specifications are made of thick cold-rolled steel plate and are stamped in one step.
The support iron plate of the desktop board is made of thick cold-rolled steel plate and is stamped in one step.
The bottom support iron plate of the seat surface is made of thick cold-rolled steel plate and formed by one-time stamping. The iron force-bearing bars on both sides of the seat surface are made of national standard round steel to ensure safety and firmness. The distance between the seat surface and both sides of the support arm is, Move freely.
The supporting arm support iron plate is stamped and formed by one-time cold-rolled plate made of supporting iron, and the steel plate wrapped around it is welded and formed. All welding parts are carbon dioxide shielded welding, and it is ensured that there is no desoldering, virtual welding, or welding penetration. All welding The mouth is polished smooth. After all steel pipes have been deoiled, rusted, pickled and phosphated, the surface is treated with high-temperature electrostatic spraying.
The tabletop is made of beech-colored fireproof board, and the inner base is thick melamine board. The depth, front duckbill edge, and gap between the tabletop and the back board are large. The desktop board is fixed securely and firmly with electroplated screws, and the cross-section is edge-sealed with a durable material that is not easy to fall off.
The thickness of the laminate is beech-colored melamine board, the depth is high, the laminate is made of electroplated large cap screws with lock nuts, which will never loosen, and the cross-section is edge-sealed with a durable material that is not easy to fall off, with a fully automatic edge banding machine.
The seat board is made of multi-layer board with beech wood grain fireproof board on the surface. The seat board is fixed with electroplated large cap screws and lock nuts, which will never loosen. The seat panel is restored using a self-gravity restoration design, equipped with silencer rubber, which makes the restoration noise-free, wear-resistant, and non-deformable. The seat panel is in a vertical state when it is lifted by its own weight. It must be able to rise and fall freely when it is lifted by its own weight. The cross-section is made of durable material that is not easy to fall off and is fully automatic. Edge banding machine.
The seat back panel is made of the same material as the seat panel, with a curved shape, the width does not exceed the seat panel surface, and the height is appropriate to ensure comfort. The backrest panel is a thick multi-layer board with a beech wood grain fireproof board veneer on the surface. The next molding will ensure stable performance without deformation and durability. The seat back plate is fixed with electroplated large cap screws and lock nuts, which will never loosen.
The shape of the seat is designed in line with ergonomic principles and can freely form body curves, providing good comfort