How to maintain the polyurethane screen if it is damaged

How to maintain the polyurethane screen if it is damaged? In response to this problem, the editor has summarized the following content, let’s take a look at it together
There are many main reasons for the screen to be damaged, including the quality of the screen. Unqualified screen tension, vibration motor steering error, clay accumulation, etc. These will cause the vibrating screen to break too quickly. How should we avoid these problems and make timely adjustments? The tension of the urethane screen is not enough. So as to cause the screen to vibrate. This situation is usually caused by breakage or damage along the edge of the screen or the edge strips. The quality of the screen is unqualified. The screen generally has an upper screening layer and a lower stress layer. Polyurethane screen plate requirements These layers are closely connected. If the screen pre-tensioning process is poor, when the stress-bearing layer at the bottom of the Shandong screen is tightened, the screening layer is not tightened, and the throwing force of the drill chips during operation is greatly reduced and cannot be discharged. Drilling cuttings
Therefore, when we choose products, we must clearly identify the manufacturer. Only the products made by such manufacturers can guarantee the steering error of the motor. When debugging the steering of the vibration motor, the on-site operator must based on the previous single-axis vibration Based on experience in using sieves or linear vibrating screens, it is believed that as long as the cuttings move forward, this method is not applicable to the urethane screen of the translational elliptical vibrating screen. If the motor mistakenly rotates inward, the projection angle will also be forward, but The drill cuttings have the force of rolling backwards. At this time, the drill cuttings move forward much slower and stay on the screen for a long time, which may even cause the drill cuttings to be unable to be discharged
The above is the damage to the polyurethane screen introduced How to maintain the phenomenon? Our company adheres to the quality purpose of quality first and customer first, and takes the corporate philosophy of providing qualified products with advanced technology, excellent performance, excellent quality, and satisfactory quality to the majority of users. We serve our customers wholeheartedly and look forward to our cooperation