Color steel fiberglass sandwich panel

Purpose
Industrial factory warehouse
Warehouse box packaging
Steel residential original building mezzanine room
Mobile house
Various purification rooms, adjustment rooms, etc.
/> Features
Glass wool sandwich panel has high closed cell ratio and excellent energy-saving effect
Green and environmentally friendly
One-time investment and continuous savings
Unique plug-in interface design, stronger ability to withstand negative wind pressure
Diverse, beautiful and elegant shapes, no cold bridge, high stiffness, good flatness, glass wool grade, non-combustible
Tight plug-in interface, no heat conduction from steel plates
Polyurethane side seals on both sides block the water absorption path of the core material. Extend service life
Unique connection design, stronger ability to withstand negative wind pressure
Good fire protection performance is suitable for walls and roofs of large public buildings, industrial plants and other buildings that require fire protection .
Glass wool is a roll material made to meet the needs of large-area laying. In addition to maintaining unique thermal insulation characteristics, it also has excellent fireproof, shock-absorbing and sound-absorbing properties
which is beneficial to Reduce noise pollution and improve the working environment. Mainly used for roof insulation, roof insulation, steel structure factory building wall insulation, indoor insulation and sound absorption for breeding
Roof insulation, fire protection) thermal insulation, heat insulation, fire prevention, sound absorption , the effect is very ideal. During construction, it can also be cut as needed to achieve better moisture-proof effect. It is an excellent thermal insulation, fireproof and sound insulation material for flat roofs and walls of factories and workshops.
Main plates
Material/base plate (color-coated plate, galvanized plate, stainless steel plate, aluminum foil, paper, plywood, etc.)
Introduction to the performance of each plate color-coated plate
The base plate is hot-dip galvanized or aluminized Zinc plates also use electro-galvanized substrates, and the surface paint does not fall off after bending
Color steel plates used for composite panels are generally two-coated and one-baked (two-coated-one), while two-coated and two-baked (two-coated, two-coated) or There are quality problems such as serious loose edges, missing pine core in the middle, large jagged edges
serious uneven ovals, etc. It cannot be used to produce composite panels.
Galvanized sheet
Sometimes the bonding effect is not good and it is not easy to deal with and needs to be dealt with.
Stainless steel plate
It has good corrosion resistance and toughness, and is difficult to process. Sometimes the bonding effect is not good and needs to be processed.
Aluminum foil paper
Reinforced aluminum foil is a composite material with glass fiber reinforcement sandwiched between aluminum foil and kraft paper. It has functional properties such as flame retardant and fireproofing, and is beautiful and durable.
Ideal supporting insulation layer for thermal insulation and sound insulation.
The main raw material of foam board is polyvinyl chloride, which is characterized by smooth and beautiful surface, light weight, flame retardant, moisture-proof, sound-proof, anti-corrosion, easy to cut, good weather resistance
Acid and alkali resistant and easy to clean.
Plywood
Due to the limited length of each sheet, the compactness effect of Plywood is not very good, and cracks are difficult to solve.
Main core materials
Materials (mainly rock wool, glass wool, flame retardant paper, honeycomb board, polyurethane, etc.)
Introduction to core material performance foam board
Made of expandable polystyrene particles It is a raw material that looks like fertilizer particles. It is pre-foamed by heating to form larger particles like white pearls, and then heated and pressed in a mold to form a foam plastic sheet with a fine closed-cell structure.
Polyurethane has high energy-saving performance
It is a material with excellent fireproof and thermal insulation properties. The bulk density of polyurethane used to make composite boards is generally kilograms
Rock wool boards
are made of basalt as the main raw material , after being melted at high temperature, inorganic fibers are made by high-speed centrifugal equipment. At the same time, a certain proportion of
adhesive is evenly added and baked into large plates, which are cut into rock wool strips according to production needs. Rock wool is non-combustible and fire-proof. Good performance.
Glass wool
is a lightweight, heat-resistant and elastic insulation material. It is widely used in chemical and pharmaceutical factories, heavy industry machinery and equipment, construction, vehicles and aerospace. It is an ideal
thermal insulation, fireproof and sound-absorbing material. Material.
Flame-retardant paper honeycomb panel
It is a national-level fireproof material. It has the advantages of good flame retardancy and good compressive strength. It only carbonizes, does not burn, does not produce toxic substances, and can be completely recycled and reused. It is a polystyrene
Ideal replacement for core materials such as ethylene polyurethane rock wool.
Polyurethane
It is a material with excellent fireproof and thermal insulation properties. The polyurethane board used for composite boards is generally in kilograms. All staff sincerely look forward to cooperating with you!
The company always provides you with high-quality services with advanced technology, strict management and good reputation. We believe in the tenet of quality first, credibility first, perfection and sincere service
and advocate the belief of constant pursuit and innovation. We welcome friends from all walks of life to visit us.