Shantou Lapeng Ceiling Heyuan City Lighting Soft Film Gaozhou Inkjet Printing Light Box

Shantou Lapeng Ceiling Heyuan City Lighting Soft Film Gaozhou Inkjet Printing Light Box
Guangdong Soft Film Ceiling Decoration Materials Co., Ltd. Master Long
.
Underframe production-ordering-keel installation-ceiling installation-opening-leaving after cleaning
1. Underframe production stage: (usually I have two methods: underframe production and assistance and guidance)
/> , the parts that need to be made of the chassis
The modeling ceiling frame part, air outlet, sprinkler, smoke detector, downlight, trumpet, etc.
Making the code keel chassis
The code is wide, high, and the wide surface is connected to the bottom frame. If the base frame is made of wood, it should be made of wood with a width of . Regardless of whether it is a wooden or square pipe, it must be fixed on the concrete wall so that it is strong enough not to fall off. The above is the production of the base frame of the flat ceiling. If
you want to make a special-shaped ceiling, the base frame must first make a special-shaped trend at the position where the coding keel is installed, and the coding keel is only installed at the closing position of each piece.
b. Production of flat code keel chassis
The flat code is wide and 3. high, and the high surface is connected to the bottom frame. If the wall is made of wooden plywood, it can be fixed directly with the flat code keel
without the need for a code base, but the position where the flat code is fixed must be a wooden plywood or a hollow square pipe.
Double-button code keel chassis production
The double-button code is wide and high. The wide surface is connected to the chassis. If the double-button code chassis is made of wood, the width should be at least
and the thickness should be at least
. If it is made of square tubes, use 3* square tubes, and fasten the 3rd side and the double-button code surface with rivets. The function of the double buckle code is to connect two pieces of soft film, which can be made into special shapes, etc., so the chassis should also be made into corresponding special shapes, and the shape should be made according to the drawings.
Wooden base frame (suitable for iron or impermeable steel)
Fixing method of keel
First fix the wooden square on the surrounding cement wall, and then fix the code on the wooden square . Pay attention to the wooden square