Drum type finishing machine

Drum type polishing machine
The drum grinding machine adopts a horizontal rotary barrel. The inner barrel is lined with rubber, which is acid and alkali resistant and wear-resistant, and can prevent damage during work. It is the simplest and most convenient model in the grinding machine series, suitable for processing, and the most economical machine purchase cost.
Adopting the principle of centrifugal motion, the finishing efficiency is high and the work efficiency is improved ~ times.
It is suitable for finishing and finishing processing of small and medium-sized workpieces in batches, especially for workpieces with special-shaped cavities.
It has the advantages of low noise and easy operation. The barrel body can be rotated arbitrarily and has an appropriate slope, so unloading materials is simple and convenient.
The volume of the workpiece in the drum, the workpiece, the grinding stone, the water, etc. should not exceed the maximum volume of the drum. The ratio of the workpiece to the grinding stone is generally ~, and for fine grinding, the specific workpiece should be determined after testing.
In principle, the standard working time at one time is about an hour. Replace the water and abrasive every hour or so before continuing the operation. For materials such as stainless steel, iron, copper, zinc, aluminum, and magnesium alloys, stamping, die-casting, and forging; for wire rods, ceramics, jade, coral, synthetic resins, plastics, porcelain, and other materials, surface polishing, chamfering, burr removal, rust removal, rough polishing, precision polishing, gloss polishing, and black removal Film blackheads and fine grinding chamfer polishing.
Common specifications liters liters liters liters liters
Technical parameters
Model
Volume
Motor power
Power supply
Rubber lining< br/> Weight
Cylinder speed
Machine size
Length*width*height






**






**






**






**






**






**
*





**

Process Consulting Mr. Shen Yao Mr.