How to eliminate the accompaniment in the operation of NE elevator

During the operation of the elevator, due to various reasons, accompaniment often occurs. As the saying goes, it is noise. So how to solve it at this time? Let’s learn together! The bottom plate of the elevator base and the chain bucket collide. Adjust the elastic device of the base to tighten the chain.
The driven shaft key of the transmission shaft is loose, the sprocket is displaced, and the chain bucket collides with the lifting casing. Adjust the sprocket position and tighten the key.
When the guide plate collides with the chain bucket, adjust the position of the guide plate. There is material between the guide plate and the chain bucket, and enlarge the material input angle of the machine base.
If the bearing fails and cannot operate flexibly, the bearing of the elevator should be replaced.
If the material block or other foreign matter is stuck in the elevator base shell, stop the machine to remove the foreign matter.
The tooth profile of the driven sprocket of the sprocket drive is incorrect. Correct the sprocket tooth profile or replace the sprocket.
If the transmission sprocket and chain are poorly detached, correct the tooth shape of the elevator transmission sprocket. If the transmission chain is idling, adjust the chain length.
The hoist casing is not installed correctly. Adjust the verticality of the entire length of the casing.
When you encounter such a phenomenon when using a hoist, you can start from the above aspects and effectively solve the problem, so it is necessary for everyone to master it.