NZJ-1 Concrete Shaking Table Magnetic Shaking Table Vibrator Wholesale Price

Concrete vibrating table magnetic vibrating table vibrator wholesale price
Concrete vibrating table is specially used for shaking concrete specimens and products in the laboratory.
[Technical Parameters] Table size * meters Vibration table frequency/min Amplitude Machine power watts
Concrete vibrating table operation process
Preparation work
Before installing the vibrating table, you should first After laying a good foundation, the soil level of the foundation should be leveled and the chassis bolts should be pressed before installation. The fixing bolts must be tightened during installation. When the vibration table is installed and tested, drive it for a few minutes and then stop the machine to check all fastening bolts. If they are loose, they must be tightened before use.
Two test operations
During the shaking process of the vibrating table, the concrete products should be firmly fastened to the vibrating table. The required vibrating products should be placed symmetrically with the table to achieve load balance.
Three Precautions
The vibrator bearings should be inspected frequently, disassembled and cleaned regularly, and the lubricating oil should be replaced to keep the bearings well lubricated. The vibrating table should have a reliable ground wire to ensure safety.