HT-1 concrete carbonation depth meter carbonation depth wholesale price

Concrete carbonation depth measuring instrument carbonation depth wholesale price
An instrument used to detect the carbonation depth of concrete. It has the characteristics of small size, light weight, easy to use and high testing accuracy. Technical parameters:, Dimensions:, Weight:, Measuring depth:, Graduation value:, Magnification:
Instructions for use of the carbonization depth ruler: The carbonization depth ruler is used to measure the strength of concrete using the rebound meter method. Special instrument for measuring the depth of surface carbonization layer.
Carbonized depth ruler structure: The ruler consists of six parts: support, body, body, measuring rod, measuring needle, and scale. The measuring rod and the measuring needle are fixed in one body and installed in the body and the body hole. When the two red semicircles at the junction of the body and the body form a circle, the measuring rod can move up and down freely to adjust the length of the measuring rod extending out of the bottom surface of the support. When the bodies rotate relative to each other so that the red circles are staggered and locked, the measuring rod is locked and fixed. When using, first extend the probe to the left and right sides of the bottom of the support and lock it, then place the measuring ruler on the end face of the hole to be measured, and use the pointed side of the probe to close to the inner wall of the hole. At this time, the tip of the stylus can be adjusted to align with the dividing line between carbonization and non-carbonization, and then locked. At this time, the reading of the upper end of the body facing the engraved line on the standard ruler is the measured carbonization depth value. In the ruler, the long engraved line on the left is each grid, and the short engraved line on the right is the middle value of the long engraved line.