SS-15 Mortar Penetration Meter Mortar Anti-Penetration Meter Wholesale Price

Mortar permeability meter Mortar anti-permeability meter wholesale price
Product introduction
The mortar permeability meter uses the pressure of the sealed window and the piping system connected to it to be equal (ignoring the faucet), and uses a water pump to apply pressure. It is a simple device that uses an electric contact pressure gauge and a simple electrical system to maintain the pressure within the specified range for testing. When there is a power outage, there is no three-phase power supply, or the instrument electrical control system fails, manual constant voltage can be used to work to maintain the continuity of the test.
Principle of the mortar permeability meter:
It uses the pressure of the sealed window and the piping system connected with it to be equal (ignoring the faucet), applies pressure with a water pump, and uses an electric contact pressure gauge and a simple Electrical system, a simple device that maintains the pressure within the specified range to conduct tests. When there is a power outage, there is no three-phase power supply, or the instrument electrical control system fails, manual constant voltage can be used to work to maintain the continuity of the test.
The mortar permeability meter consists of a rack test mold, separator, water pump, water storage tank and electrical system. The structure and function of each part are described as follows:
◇Concrete impermeability meter rack test Mold
The frame is welded with high-quality steel. The test mold chassis and tray are screwed to the frame. The test mold and the test mold chassis are connected with threads (if there is a rubber gasket in the middle to seal it), and the cover plates on both sides of the frame are There is a water tank and tool box on it. The water tank is used as a water source during testing.
◇Concrete impermeability meter water pump part
The water pump uses an electric motor as the power source, drives the eccentric shaft to rotate through a two-pole gear speed change, and then drives the plunger to reciprocate through the guide pillar and connecting rod to work. , since the flow rate of the water pump is very small, the water pressure of the supply body can be considered to be static. The water pump can also work manually.
◇The separator part of the concrete impermeability meter:
The separator is a valve and a return valve centrally installed in front of the instrument. It is mainly used to control the flow or cut-off of the six-dimensional water path and return it to the instrument. The water valve acts on the pressure reducing device.
◇The water storage tank part of the concrete impermeability meter:
The water storage tank is a container for storing water, and it can also play a role in reducing the impact of pressure water. Before the test, use the accessory funnel to inject water into the water storage tank through the drain nozzle. After the test is completed, drain the water in the tank through the drain nozzle.
Introduction to Mortar Penetration Meter:
This product refers to the mortar’s ability to resist the penetration of water or other liquid media under pressure. It can be used to measure the impermeability performance of waterproof sand, conduct comparative tests of mortar reference mortars mixed with waterproofing agents, and can also be used to conduct permeability tests of other waterproof materials. The mortar permeability meter produced by our company is suitable for the testing, research and teaching of mortar impermeability performance by engineering quality supervision and inspection departments at all levels, construction unit laboratories, scientific research units and colleges and universities. The properties of mortar are basically the same as those of concrete. For some special-purpose mortars, such as waterproof mortar, there are also requirements for mortar performance, that is, the mortar has the ability to resist pressure water penetration. This mortar permeability meter can be used to measure the impermeability of mortar. By replacing other forms of test molds and fixtures, the water permeability of other waterproof materials (such as linoleum) can also be tested.
Mortar permeability meter parameters:
◇Maximum allowable pressure: (***).
◇Plunger diameter:.
◇Plunger stroke:.
◇Plunger reciprocating frequency: seconds.
◇Flow rate: liters.
◇Upper mouth diameter:.
◇Diameter of lower opening:.
◇High:.
◇Number of test pieces at one time: pieces.
◇Working mode: automatic constant pressure and manual constant pressure.
◇Motor model: B.
◇Power:.
◇Speed: rpm.
◇Dimensions: **.
◇The weight of the whole machine: about kilograms.