Year1
<:
> 1. Microcomputer controlled artificial panel universal testing machine
It is developed and produced for various physical and chemical performance tests of artificial panels and decorative artificial panels, meeting the requirements of B "Artificial Panels and According to the requirements of "Test Methods for Physical and Chemical Properties of Decorative Artificial Panels", it can conduct measurement tests such as surface bonding strength, static bending strength and elastic modulus, screw holding force, internal bonding strength, etc. This universal testing machine for artificial panels meets both German standards and Japanese standards.
In addition to all the advantages this machine has, it also has the following features
(1) Main structural features of the microcomputer-controlled artificial panel universal testing machine:
The main machine is a portal-type equal-strength frame. The mechanical transmission adopts Japanese Fuji full-digital AC servo motor and driver, German Eisler precision reducer, and German Perak West ball screw auxiliary transmission. The main engine has small power loss and no gap transmission, and can be used for low-cycle fatigue tests. Moreover, the transmission is stable, the response is fast, and the noise is low.
. Dual-space working mode can be used, such as stretching in the upper space and compression and bending tests in the lower space. There is no need to load and unload fixtures for tests in the upper and lower spaces
.Servo The unit adopts Japanese Fuji fully digital AC servo motor and driver.
.The force measuring sensor adopts Guangzhou Electric Measurement Products
It has automatic zero adjustment, automatic calibration and other functions
. It has overload, over-travel, over-voltage, over-current, over-heat and other protection functions
/> . Equipped with a LCD control box, which is convenient for adjusting the moving beam and has various control functions such as speed and step.
(2) Main technical indicators of microcomputer controlled artificial panel universal testing machine
. Maximum test force:
. Effective force measuring range: %% (), no internal and external grades
.Force resolution: (the resolution remains unchanged throughout the process)
.Relative error of force indication.%
.Test speed range: (stepless speed regulation, arbitrary setting)
.Speed indication Relative error.%
. The speed corresponds to the allowable test force: when the speed is below, it is the maximum test force, when it is above, it is % of the maximum test force.
.Displacement resolution:
.Relative error of displacement indication value.%
(3) Standard configuration
.Testing machine host (portal structure)br> .Liquid crystal control A set of display system br > . A set of Japanese AC servo motor and its speed control system br > . A set of high-precision load sensor () br > . Attachment type: br > . Surface bonding strength attachment. Internal bonding strength attachment .Surface bonding strength
. Static bending strength attachment. Elastic modulus device. Nail holding force attachment
.A set of Lenovo brand microcomputer
.An inkjet printer
. A set of special testing software for wood-based panels
2. Electronic wood-based panel universal testing machine
(1) Main functions and scope of application of electronic wood-based panel universal testing machine
Electronic man-made panel The board testing machine can test and analyze the mechanical properties of various plywood, particleboard, medium density fiberboard and other artificial boards and decorative artificial boards. This product is widely used in the wood deep processing industry and artificial board production enterprises. National standard, static bending strength, bending elastic modulus, surface bonding strength, gluing strength, screw holding force and other conventional test data. This equipment is a necessary testing equipment for manufacturing enterprises, construction units, product quality supervision and inspection institutes and building materials product testing departments.
< r#>
(2) Main technical indicators
Technical requirements for serial number inspection items
, maximum test force
, accuracy.
, minimum deformation Reading value.
, Relative error of indication value %
, Relative error of test force indication repeatability %
, Relative error of test force zero point.%
, Speed range
, Test space
, Testing machine size
, Electric loading method
, Power supply voltage (must have reliable grounding measures) ~%
(3) Electronic wood-based panel universal The working environment conditions of the testing machine
, within the range of room temperature to ~, the relative humidity is not greater than %
, correctly installed on a stable foundation or workbench, the level is. , In an environment without corrosive media and strong electromagnetic field interference
The fluctuation range of the power supply voltage should not exceed % of the rated voltage.
(4) Structural characteristics and working principle of the testing machine
This machine is composed of mechanical and electrical parts
. Mechanical part structure and working principle:
This testing machine is The upper space is stretched and the lower space is compressed using electric loading. The bottom is the structural bearing bracket of the whole machine, which contains the motor driver, loading motor, reduction mechanism, power transmission mechanism and other components. The upper part is for specimen clamping and force value and deformation measurement. The mechanism includes main components such as loading transmission mechanism, specimen tensile fixture, load cell, photoelectric encoder, etc.
. Electrical part:
The electrical part consists of display, measurement and control parts. The display measurement control part implements various control, display, data collection, processing and other functions. The main controller can select tensile, compression and other test modes according to different test requirements, and set the sample parameters of each test mode. After adjusting the sample, press the test button, the system will automatically start the test, and according to the corresponding test conditions, automatically determine the shutdown process, and display the corresponding test results at the same time.
. Several main functions of this machine:
.. Fully open parameter setting
.. The setting parameters are permanently saved and will be automatically read and displayed next time the machine is turned on
.. Floating zero point Setting, the zero point can be adjusted at any time
.. Peak hold and storage, constant value following
.. Within the effective speed range, the speed value can be set arbitrarily
.. Quick speed switching during the movement of the crossbeam Function
.. Flexible data query and display function
.. Overload shutdown, audio alarm protection function
.. Automatic judgment function at the end of test
.. Limit position protection, etc.
It is developed and produced for various physical and chemical performance tests of artificial panels and decorative artificial panels. It meets the requirements of B "Test Methods for Physical and Chemical Properties of Artificial Panels and Decorative Artificial Panels" and can conduct surface bonding strength and static bending strength. And elastic modulus, screw holding force, internal bonding strength and other measurement tests, it is an ideal testing equipment for artificial board and wood production enterprises and quality supervision departments.
(1) Features of the liquid crystal wood panel universal testing machine:
. It adopts a two-column desktop structure, with a small size and beautiful appearance.
.Using handwheel rotation for loading, which is convenient and fast.
. Equipped with a wide-screen LCD control system to display the test force and test force peak value in real time.
(2) Main technical indicators of liquid crystal wood panel universal testing machine:
. Maximum test force:
. Test force accuracy: better than %
. Test force resolution Rate:
. Effective width of test space:
. Protection function: Automatically shut down when the maximum test force is exceeded.
.Testing machine host form: desktop frame.
(3) Basic configuration
. One testing machine host ()br > . One set of LCD control display system br > . One set of high-precision load sensors () br > . One set of special fixtures
/>
Wood-based panel universal testing machine
价格
Negotiable
- total supply
- 0
- MOQ
- 0
- brand
- 广州澳金工业自动化系统有限公司
- area
- GuangdongGuangzhou City
- Delivery period：
- Shipped within 3 days from the date of payment by the buyer
Buyers are still looking
- Which stone quarry eNegotiable
- DT5-4 (formerly LD5-￥15300.00/
- Monoplane drop machiNegotiable
- Compound salt water ￥1.00/
- Microcomputer controNegotiable
- Wood-based panel uniNegotiable
- Geotechnical materiaNegotiable
- Denitration catalystNegotiable
- High strength bolt cNegotiable
WhatsApp
