JJ-5 type cement mortar mixer mixer wholesale price

Type cement mortar mixer mixer wholesale price
Operation of the automatic function of cement mortar mixer:
★Switch the function switch on the column to the automatic position, and press the start switch on the controller , the entire operation program is automatically controlled by the control box.
★It will automatically stop after the whole process is completed. If you need to stop the machine during operation, you can press the stop button and then restart the machine.
★After pressing the start button, the display will start to display time, slow speed, acceleration, stop, fast, and the running indicator light will flash simultaneously.
★During automatic control, all manual function switches must be moved to the stop position.
Operation of the manual function of the cement mortar mixer:
★Switch the function switch on the column to the manual position.
★Press the required function buttons step by step according to the requirements of the control program, and the time is controlled by the operator with a stopwatch.
Adjustment and maintenance of cement mortar mixer:
Adjustment:
The working gap between the mixing blade and the mixing pot has been adjusted to the range before the machine leaves the factory. To adjust the working gap between the mixing blade and the mixing pot, loosen the adjusting nut and turn the blade to move up and down to the correct gap, then tighten the adjusting nut. A random detection rod is placed in the gap for measurement.
Maintenance:
★The working area should be kept clean. After each use, the residual mortar inside and outside the mixing blade and mixing pot should be thoroughly cleaned, and the mortar and dirt scattered and splashed on the machine should be cleaned up. After drying, put on the protective cover to prevent dust.
★This machine has no external refueling hole. Add butter to the moving parts such as worm gears, gears and bearings in the transmission box once a quarter. When refueling, just open the transmission case cover. Oil should be regularly dripped between the supports and column guide rails, and between the lifting mechanisms for annual maintenance. At one time, clean the entire machine and add oil and grease.
★If there is metal impact noise when the machine is running, you should first check whether the gap between the mixing blade and the mixing pot is normal.
★When using the mixing pot, handle it with care and do not bump it at will to avoid deformation of the mixing pot.
★Electrical insulation should be checked frequently. The cold insulation resistance ohms at ℃ ℃ relative to temperature %.
Cement mortar mixer:
Using microcontroller automatic program control to complete the mixing work, divided into high speed, low speed, rotation and revolution. The cement mortar mixer is a machine used to evenly mix the test specimens used to measure the cement strength test. The cement mortar mixer performs compound motion when working. The two rotors overlap and overlap, which will produce a weightless area. In this area, regardless of the shape, size, and density of the material, the material can be in an instant weightless state. The material is in the machine. It forms an all-round continuous circulation turning to achieve the effect of rapid mixing and uniformity. Comply with national standard B requirements.
The cement mortar mixer mainly consists of a two-speed motor, a sand adding box, a transmission box, a spindle, an eccentric seat, a mixing blade, a mixing pot, a base, a column, a support, an outer cover, a programmable controller, etc.
Operating instructions for cement mortar mixer:
★Turn on the power and wipe the mixing pot and mixing blades with a damp cloth before mixing.
★Pour the weighed cement and standard sand into the mixing pot.
★Start the machine, slowly add water after mixing, and finish adding it inside.
★The mixing will stop when the machine is started.
★Scrape off the glue stuck to the blades and remove the mixing pot.
★After the operation is completed, the mixing blades and mixing pot should be cleaned in time.
Operation and use of cement mortar mixer:
Insert the power plug of the machine into the power socket to turn on the power. The red indicator light lights up to indicate that the power is on. Then insert the program controller plug into the program controller socket of the machine. The program controller digital The tube is shown as follows: put standard sand into the sand pot, water and cement into the mixing pot, install the mixing pot into the positioning hole of the support, turn the pot clockwise until it is locked, and then pull the handle to move the mixing pot upward to the mixing working position Location.
Working principle of cement mortar mixer:
The two-speed motor transmits the power to the worm in the transmission box through the coupling, and then transmits the power to the main shaft through the worm gear and a pair of gears and reduces the speed. The main shaft drives the eccentric seat to rotate synchronously, causing the stirring blade fixed on the eccentric seat to revolve. At the same time, the mixing blade completes its rotation around the fixed internal gear through the planetary gear at the upper end of the mixing blade shaft. The mixing pot and the support are rotated and locked with an eccentric groove. After sand is added to the sand pot, sand can be added automatically or manually at a specified time. The handle is used to lift and position the mixing pot.
Parameters of cement mortar mixer:
★The motion trajectory of the stirring blade in the mixing pot is the same as ().
★Stirring blade width:.
★The connecting thread between the stirring blade and the stirring blade shaft is: ． .
★Stirring pot volume:.
★Wall thickness:.
★The working gap between the stirring blade and the stirring pot is.
★The power is:.
★Dimensions: length, width and height ().
★Net weight:.