High quality product OPGW optical cable tension clamp

材质：

热镀锌

长度：

1500

破断力：

50KN

%: >Baoding Henlida is a comprehensive enterprise integrating production, development, sales and services. Reliable quality is our guarantee and honest service is our responsibility. Service hotline: Manager Zhu
: %:
: %:
The tensile string combination should be able to be connected to the tower ground wire hanging point, and the strength of the entire string should not be less than the rated strength.
The manufacturer provides a complete range of tension clamps, including high-performance tension clamps, protective strips, grounding jumper components, etc.
The tension clamp must be of the pre-twisted wire type. This design and material have at least the ability to withstand %R (). In this case, there will be no slippage in the clamp.
The tension clamp should be able to withstand the maximum design allowable short-circuit current without causing overheating and loss of mechanical strength of the clamp.
The provided grounding jumper assembly must include a special grounding wire and a grounding clamp with one end connected to a tightly fitting aluminum alloy parallel groove clamp and the other end connected to the pole tower. The holding force of the tension clamp should reach % of the tensile breaking force, and it should not slip or be damaged. The steel pipe containing the optical fiber should not be deformed in any way. The damage strength of the tensile fittings is not less than () (the strength of the tensile fittings used on the frame side is not less than). The actual safety factor of the design of optical cable fittings is: operating conditions >., disconnection and disconnection conditions >., meeting the relevant regulations in the design regulations.