Year1
- 尺寸大小：
- 800×600×1080mm
Fuyang Zhicheng Technology Co., Ltd.
Xi'an Sales Department Telephone: < br/> Telephone: Mobile:
:,
Address: Nanyufeng Village, south of Shihua Avenue, Weiyang District, Xi'an City (south of Budweiser Plaza)
Anhui Contact:
Telephone:
Mobile:
:
:
Address: Science and Technology Center No., Fuyang Economic and Technological Development Zone, Anhui Province
National toll-free service hotline:
Price: Yuan
Liangpi machine (dough machine, rice noodle machine, dough rolling machine, rice noodle machine)
Model
Efficiency
Power.
Overall dimensions
Machine weight
Instructions for use
Press the power button and the voltage on the machine panel needs to be displayed.
. Set the temperature controller at the required temperature, turn on the heating switch, the green indicator light will light up to indicate the start of heating. After the temperature is reached, the red indicator light will light up and stop heating. This will allow the traffic lights to switch back and forth about once, making the tube After the temperature of all aspects of the body and the spiral shaft is maintained, start the main switch, open the batter flow switch of the hopper, let the batter enter the machine, and then check the temperature of the raw and cooked dough or adjust the flow rate of the material.
The red light of the temperature controller is on for constant temperature and the green light is on for heating.
If the dough breaks during the production process or the dough comes out very fast in the middle and the two sides fail to come out, it means the temperature is too high. If the dough comes out neatly and has no gluten, it means that the dough is not cooked yet and the temperature is low. As long as the dough is blistered, has patterns, has gluten, and is not sticky to your hands, it is fine. When making cold skin and rice skin, they should be brushed with oil and folded, and should not be soaked in water.
When the batter is almost used up, you should turn off the heating switch and let it continue to come out. After the batter is finished, remove the outlet mold and put it into cold water. Pour clean water into the hopper and repeatedly heat and clean the remaining materials in the machine. Wait until After cleaning, turn off the host switch.
If there is a sudden power outage during production, the knife switch should be cut off immediately, and the outlet mold should be removed and cleaned to prevent the pasta from drying out. You can brush some cooking oil on the screw to facilitate next use.
Fuyang Zhicheng Technology Co., Ltd.
Xi'an Sales Department Telephone:
Telephone: Mobile:
:,
Address: Nan Yufeng, south side of Shihua Avenue, Weiyang District, Xi'an City Village (South of Budweiser Plaza)
Anhui Contact:
Telephone:
Mobile:
:
:
Address: Economic and Technological Development, Fuyang City, Anhui Province Development Zone Science and Technology Center Number
National toll-free service hotline:
WhatsApp
