The endoscope cleaning center is high-end and classy under the Dixin brand

< Endoscope cleaning workstation>
: >< r#>< r>Dixin Technology< > has introduced large-scale thick sheet blister equipment, using imported< r>< >polymer composite materials, specially used for tanks And blister molding of functional back panels, good process management ensures product quality and appearance.
< < r#> ><:><:>
< >: > r(,,): b >Product Features:
><:><:>
< >: > r(,,)>◆< >Beautiful appearance, elegant, luxurious, complete configuration, powerful functions, integrating technology and humanity.
r(,,)>
r(,,)>◆Dixin< >The endoscope cleaning and disinfection center adopts the most scientific and advanced endoscope cleaning method in the world< r>.
r(,,)>
r(,,)>◆< >Multi-tank grading and drying stage segmented control< r>,< >Full mirror immersion cleaning< r>,< >The entire process is streamlined < r>,< >The hierarchy is clear and uninterrupted.
r(,,)>
r(,,)>◆< >The material is < r>< >imported polymer molded in one step, which has good impact resistance, seamless corners, and is durable. Acid and alkali antioxidant < r>, < > smooth and shiny surface, easy to clean and other characteristics.
><:><:>
: >
Standard Operating Procedures for Cleaning and Disinfection (Sterilization) of Endoscopes
Cleaning and Disinfection (Sterilization) of Soft Endoscopes )Standard operating procedures
1. Pretreatment
Immediately after use, wipe off the dirt on the outer surface with wet gauze, and repeatedly supply water and air for seconds.
Remove the endoscope, install the waterproof cover, and send it to the cleaning and disinfection room.
2. Leak test
A leak test should be conducted before cleaning and disinfection. Under normal circumstances, wet testing is used, and dry testing is used in emergencies.
3. Washing
Put the endoscope into the water washing tank, rinse it thoroughly under running water, and wipe the lens body and operating part with gauze. Replace the gauze after use.
Remove the biopsy inlet valve, aspirator button and air and water supply button, and use a clean brush to thoroughly scrub the biopsy hole and the aspirator pipe of the light guide hose at least once. When scrubbing, you should touch the brush hands at both ends and clean the brush. Dirt on the head. Clean and disinfect the brush after use. Rinse the removed valves and buttons with clean water and dry them.
, install the full pipeline perfusion device, pipeline plug, waterproof cap and suction device, and use the suction device to repeatedly aspirate the biopsy hole.
Connect the full-pipeline perfusion device to the syringe to absorb clean water and inject it into the water supply pipe.
Use a suction device to suck up the moisture in the biopsy hole and dry the lens body.
After use of endoscopic accessories such as biopsy forceps, cell brush, incision knife, guide wire, lithotripter, mesh basket, contrast catheter, foreign body forceps, etc., first put them into clean water and use a small brush to clean the forceps flap. Clean and dry the inner surface and shaft joints.
The prices marked on this site are reference prices. For actual prices, please contact customer service by phone