: The centrifugal turntable of the small centrifugal humidifier rotates at high speed under the action of the motor, and the water is thrown out forcefully and then hits the atomization disk, atomizing the water into ultrafine particles of about microns and then spraying go out. Small centrifugal humidifiers can be set up and installed at will, and have the advantages of small space, safety, reliability, and long life. The small centrifugal humidifier is beautiful and compact, easy to operate and occupies a small area. Equipped with a portable handle for quick movement. Full range of humidification, can achieve any humidification.
(, , ): : >The principle of micro centrifugal humidifier is that the centrifugal turntable rotates at high speed under the action of the motor, and the water is thrown out forcefully and then hits the atomization disk, atomizing the water into ultrafine particles of about microns. The particles are then ejected. After being blown into the air, heat and moisture are exchanged through the tiny particles atomized by the air and water to achieve the purpose of fully humidifying and cooling the air. Small centrifugal humidifiers can be set up and installed at will, and have the advantages of small space, safety, reliability, and long life.
r#: (, , )> r#(>Small centrifugal humidifier parameters:
b Volume height: cm
b Chassis water storage capacity: kg
b Ultra-fine mist, Powerful type, low requirements on water quality
bVoltage:
bMotor: (approximately one revolution per minute)
bPower:
bNet weight: kg
bMist generation Quantity: kg hour
bChassis diameter: cm
r#(>Small centrifugal humidifier Actual picture:
r# (, , )> r# (>
: Small centrifugal humidifier Industrial humidifiers can be widely used in:
r#(>:
<. Increase humidity content and reduce workshop temperature< br/> <.Increase the strength of fibers, yarns and fabrics>
<.Eliminate static electricity, improve hand feel, and improve quality>
<.Reduce breakage rates and increase equipment operating speed>
<.Reduce waste and improve economic benefits.
r#(>
<1. Install temperature and humidity controller to achieve complete automation.
<2. Add fertilizer directly to water and spray it, the effect is particularly good.
<3. Do not add strongly acidic or alkaline chemicals to water.
<4. Do not use buckets or water filters. Clean debris (water plants, snakewood tips, moss, etc.) can easily block the water outlet, so please clean it frequently.
<5. Water containing heavy iron and lime can easily cause the water outlet to become clogged and the motor shaft to get stuck, causing the water spray volume to become smaller and smaller and the motor to stop rotating and burn out.
<6. Do not stop using it for a long time (use it at least once a day and at least 10 minutes at a time).
<7. When not in use in winter, please take the humidifier away from the water, wipe it dry, and run it idling for a few minutes to prevent the bearing inside the motor from getting stuck, causing the motor to not rotate and burn out the next time it is used.
< Note:
< Because humidifiers are used in water all year round, they will inevitably become a breeding ground for bacteria. After using it for a period of time, please take out the humidifier and dry it (with a bucket), let it idle for a few minutes, and then expose it to the sun (sterilization) for a few days.