3m220 anti-slip sticker

< : : >: Transparent anti-slip stickers, bathroom
: Special anti-slip stickers for swimming pools
Inch*.m, can be used with bare feet
Full range of safety anti-slip stickers ( #,#,#,#,#,#,#,#,#) Sufficient inventory
Origin: United States
Inch width, length, meters and meters
Can be cut according to customer needs Different specifications and sizes



< : : >< r# Structural diagram of safety anti-slip stickers
< : : >< r# Safety anti-slip sticker models and applicable places< br/> < : : >< r# General flat type: base material, mineral sand surface, black, transparent, yellow
< : : >< r# Suitable for: marble steps, building stairs, ramps, boats Deck, transportation hub
< : : >< r#
< : : >< r# Concave-convex flat type: Aluminum foil substrate is suitable for concave-convex surface, mineral sand surface, black, yellow
< : : >< r# Suitable for: printed steel plate steps, pedals, heavy equipment machinery
< : : >< r#
< : : >< r# Medium sand surface comfort type: special surface treatment rubber, gray , black
< : : >< r# Suitable for: indoor stairs and passages, entertainment and sports facilities
< : : >< r#
< : : >< r# Small size sand surface Comfort type: vinyl surface, transparent, white
< : : >< r# Suitable for: bathroom, bathtub, poolside, boat, ski wakeboard, etc.
< : : >< r# < br/> < : : >< r# Precautions for use:
< : : >< r# The surface should be clean, dry, and flat
< : : >< r# Appropriate temperature
< : : >< r# Avoid joints of floor tiles
< : : >< r# Avoid long-term exposure to water vapor
< : : >< r# Precautions for first-time laying:
< : : >< r# Confirm that the temperature is appropriate (too cold or too hot is not suitable for the curing of the glue)
< : : >< r# The surface should be thoroughly clean and completely dry, which will affect whether the adhesive can be used stably for a long time
< : : >< r# Do not touch the adhesive with your hands to avoid affecting the adhesive properties
< : : >< r# It is recommended to use a rubber wheel and a rubber hammer to apply a certain amount of pressure, which is beneficial to the curing of the adhesive
< : : >< r# Let it dry for more than 10 minutes. Do not move the tape within 1 hour
< : : >
< : : >< r# Also: If you find that the laying position is wrong, you can quickly tear it off. Repost