To extend the life of 2BV water ring vacuum pump, maintenance is the key

Through maintenance, excessive faults of the B water ring vacuum pump can be avoided to a certain extent, sudden or accidental problems can be avoided, and the service life can be extended. . In order to avoid wearing the impeller of the B water ring vacuum pump, the pump body or the stuck main impeller, the dust particles that enter the pump chamber with the gas and working fluid can be washed away through the flushing port at the lower part of the pump.
If hard water working fluid is used, it must be softened or the pump must be cleaned with solution within a certain period.
. The bearings of the motor that work normally are ℃~℃ higher than the surrounding temperature. The maximum temperature is not allowed to exceed ℃~℃. The bearings that work normally should be filled with oil every year, the bearings should be cleaned at least once a year, and all the lubricating oil should be replaced.
Use a mechanical seal. When the B water ring vacuum pump leaks, you should check whether the dynamic and static rings of the mechanical seal are damaged, or the sealing ring has aged. If the above situation occurs, new parts need to be replaced.
To extend the service life of the B water ring vacuum pump, not only must you purchase equipment that meets the quality requirements, but also subsequent maintenance is the key!