BAD51 explosion-proof explosion-proof lamp available from stock

explosion-proof lamp is one of the B (B) series explosion-proof explosion-proof lamps. It adopts aluminum alloy shell, glass lampshade and iron mesh protection. This explosion-proof lamp has beautiful appearance and durability. B explosion-proof explosion-proof lamps are widely used for lighting work in flammable and explosive places, and are used in various indoor and outdoor workplaces, China's coal industry, PetroChina, Sinopec, CNOOC, electric power, metallurgy, railways, steel, ships, military, , public security fire protection, chemical industry, government departments, venues, transportation, and the applicable needs of fixed lighting in large enterprises. B explosion-proof lamps can be equipped with incandescent lamps, high-pressure mercury lamps, sodium lamps, and metal halide lamps as light sources.
Edited in Routine Maintenance
Explosion-proof lamps and lampshades should be able to automatically cut off the power supply before opening. Because the surface temperature of the bulb is still very high after the power is turned off, if the lampshade is opened immediately, there is still the risk of igniting the toxic gas mixture (mainly referring to the explosion-proof structure), so explosion-proof lamps are equipped with incandescent lamps, high-pressure mercury lamps, and high-pressure sodium lamps. For light sources with high bulb surface temperatures, maintenance should wait until the bulb temperature is lower than the ignition point of the flammable gas before turning on.
When replacing the bulb (tube) Edit
When replacing the bulb (tube), explosion-proof lamps The explosion-proof joint surface should be properly protected and should not be damaged. After cleaning, the explosion-proof surface should be coated with phosphating paste or anti-rust oil. It is strictly prohibited to apply other paints. There should be no rust layer on the explosion-proof surface. If there is slight rust, it should be cleaned. There should be no numbness after treatment. The sealing rings used for dustproof and waterproofing must be kept intact, which is very important for increased safety lamps. If the sealing ring is seriously damaged, replace it with a sealing ring of the same specification and material. If necessary, replace the entire lamp. During maintenance, pay attention to whether the lampshade is intact. If it is broken, replace it immediately.