Automatic door repair and replacement of round motor in Xicheng District

brr br br(,,): : : r, , r,(,,): bbr brr : b Beijing Hongyuanying revolving door automatic door access control maintenance and replacement of automatic door aluminum alloy track
brr br br(,, ): : : r, , r,(,,): bbr brr : b Introduction to automatic sensor door
Automatic sensor door is a kind of glass door widely used in shops, hotels, enterprises and institutions and other places in recent years. , its most direct feature is that it will automatically open the door when someone or an object approaches. When an object approaches, the door does not open. Automatic sensor doors can be roughly divided into translation, rotation and push-pull types. Among them, the translation type and the rotation type are most suitable for setting up sensors.
The structure of automatic sensor door. Taking the translation type as an example, it consists of the main controller, induction detector, motor, door track, spreader wheel system, timing belt, lower guide system, automatic induction unit and other parts. These components make up all the functional parts of its work.
The working process of automatic sensor door. When the induction detector detects that someone has entered, the induction detector will collect the signal and generate a pulse signal. The pulse signal will then be transmitted to the main controller. After judgment, the main controller will notify the motor to run and monitor the number of revolutions of the motor to notify the motor at a certain speed. Time to power up and go into slow motion. The motor runs forward after receiving a certain operating current, and transmits the power to the synchronous belt, which then transmits the power to the spreader system to open the door leaf. After the door leaf is opened, the controller will make a judgment. If the door needs to be closed, the motor will be notified to reverse direction. Movement to close the door leaf.
Design of automatic sensor door. Design must be done before purchase and installation. Professional personnel are required to conduct measurements and design formal drawings and three-dimensional renderings. Set the parameter values of each component according to the number and frequency of people entering and exiting. Be careful not to be unrealistic. Setting a value that is too large or too small will affect its service life.
Maintenance of automatic sensor doors. Regularly check the engine oil in the chassis, remove dust and check whether the screws of various components are loose. Check the controller's voltage parameters for motor output, door opening and closing width, speed, braking, etc. to see if they are normal. Since the quality of automatic sensor doors is now uneven, it is necessary to reach an agreement with the property and owners to achieve regular maintenance and inspections to avoid paralysis of the entire sensor system. After the frameless glass sensor door is constructed, words such as Beware of Glass must be affixed on it to prevent people or objects from touching it.