Year1
- 附着力：
- ≤2级
- 冲击强度：
- 50kg•cm
- 耐水性：
- 24小时，不起泡、不生锈
Construction
Construction method
When coating is used for steel surface protection, the primer matching this product must be applied first, such as epoxy primer inorganic Zinc-rich primer and high chlorinated polyethylene primer. When coating this product, the coating surface must be clean, dry and free of oil and water. Before use, stir the paint thoroughly before applying it. If necessary, use supporting diluent to adjust the viscosity. Note that the solid content of the paint will decrease after adding the diluent. The paint film of each paint will become thinner after painting. Unused paint must be sealed and stored. When coating on a cement surface, the viscosity should be adjusted lower in the first step to allow the product to fully penetrate the cement surface and improve the product's adhesion strength and protective effect. This product can be applied by roller brush and air spray. The surface temperature of the workpiece should be higher than the dew point temperature ℃ during coating.
Dosage and thickness range: The density of this product is milliliters, the reference value for coating dosage is grams per square meter, and the dry film thickness is about microns. When used for coating cement concrete surfaces, the product must be primed with a two-component epoxy anti-corrosion varnish before applying the product. The dosage is grams per square meter. The dry film thickness varies depending on the surface roughness. Due to penetration, An apparently continuous film-like substance of about microns may not necessarily form after the first coat. When this product is used for chemical anti-corrosion metal surface coating, it should be applied above the brush line, and the dry film thickness should not be less than microns.
The coating interval surface is dry and not sticky to the touch
Dilute the special thinner and cleaning agent for cleaning.
Acceptance Rules Our factory guarantees that all manufactured products meet the index requirements. If the user finds that the quality of the product does not meet the index requirements, the supplier and the buyer will jointly re-inspect, or the product quality monitoring agency will conduct arbitration. If it still does not meet the technical specifications, the user has the right to return the product.
Storage and Transportation This product should be stored in a cool and ventilated place. And should be isolated from fire sources and kept away from heat sources. Storage period months. After the storage period has expired, it needs to be re-tested according to the standard regulations. If the results meet the requirements, it can still be used. When transporting products, they should be protected from rain and sunlight and comply with the relevant regulations of the transportation department.
Quality makes brand, integrity creates future
Jining Weishibao
Dedicated to excellent paint manufacturers with excellent service and high-end products, our company mainly produces experience-heavy anti-corrosion paint
, flooring Paint, special paint for steel structure, epoxy zinc-rich primer, road marking paint, high temperature paint, plastic paint, engineering machinery paint, electric vehicle paint, etc. We have been working hard for your trust. Trust us, trust your choice!
Houpu Industrial Park No., Houpu Neighborhood Committee, High-tech Zone, Jining City
Yang Lili
WhatsApp
