Intelligent pressure controller

1. Intelligent pressure controller product overview
The intelligent pressure controller is an industrial instrument that integrates control, detection and display. The instrument uses microprocessor technology to make alarm control and current output settings intelligent, flexible, easy to operate, easy to debug, safe and reliable. The operating power supply of the instrument adopts DC or AC, which is extremely convenient to use. Intelligent pressure controllers are widely used in hydropower, tap water, petrochemical machinery, hydraulics and other industries to measure, display and control the pressure of fluid media on-site.
Functional features of the two intelligent pressure controllers
Measurement, control, transmission, output and display are integrated into one unit for easy installation.
The four-digit display is clear and intuitive for nighttime observation.
The upper and lower limits of the range value, alarm value, upper and lower limit alarm return difference value, decimal point, etc. can be set and the current output can be adjusted by pressing the button.
Can output signals and relay alarm signals at the same time.
The linearization processing of the instrument software improves the measurement accuracy.
Technical Parameters of Three Intelligent Pressure Controllers
Measure medium weakly corrosive gases and liquids.
Medium temperature
Ambient temperature
Ambient humidity
Measurement range
Accuracy is better than.
Display four-digit digital tube. Display range
Output signal
Power supply or
Pressure interface standard thread (can be customized)
Pressure interface material stainless steel
Shell explosion-proof die-cast aluminum shell
Protection level
Four intelligent pressure controller installation matters
Mechanical installation
It can be directly installed on the hydraulic pipeline through the pressure pipe joint (*) (other size joints can be specified when ordering). In critical applications (e.g. severe vibration or shock) pressure pipe couplings can be mechanically decoupled by micro-hoses.
Note that when the measuring range is smaller than the range, it must be installed vertically.
Electrical connection
In order to prevent the influence of electromagnetic interference, please pay attention to the following matters
Keep the line connection as short as possible
Use shielded wires
Try to avoid direct proximity to user devices or electrical appliances that cause interference. Wiring to electronic devices
If the housing is installed with a micro hose, it must be grounded separately