550 hay mower, straw crusher, silage mower

Grass crushing and kneading machine
Product introduction of the new straw crushing and kneading machine
The model series straw crushing and kneading machine produced by Henan Yuzhiyi Machinery Equipment Co., Ltd. is a newly developed replacement product of the straw machine. The main working part is the hammer blade installed on the rotor. It has the ability to crush various granular raw materials, chop grass, corn stalks, pasture and other feeds as well as various types of cereals and other forages. It is an economical crushing equipment that is currently widely used. It can also crush corn cobs for use by friends who grow oyster mushrooms and other edible fungi. This series of hay crushing and kneading machines has the characteristics of integrating hay, kneading and pulverizing. It is an ideal equipment for large, medium and small farms and households raising pigs, cattle, sheep and poultry. It has many advantages such as simple installation, operation and maintenance, and high production efficiency.
Two technical parameters of the new guillotine kneading machine
Model type
Supporting power
Rated voltage
Rotor diameter
guillotine efficiency
Spindle speed
Overall Dimensions**
Packing Dimensions**
The above price does not include the motor and freight
Three structures and working principles of the new guillotine kneading machine
This The machine mainly consists of an upper body, a lower body, a rotor assembly, a screen, a feeding device, a frame and other parts. The body and the rotor assembly together form a crushing chamber. The rotor assembly is the main working part. The crushing of materials and the chopping of forage are completed in the crushing chamber. .
During operation, the processed materials enter the crushing chamber from the hopper and are struck by the high-speed rotating working parts and fragmented. During this process, the pellets are repeatedly subjected to collisions between the working parts and the machine body and the collision and friction between particles, and are gradually crushed. When its geometric diameter is smaller than the diameter of the sieve hole, the material is crushed under the action of centrifugal force and air flow, and the material leaks through the sieve hole into the crushing chamber and is discharged from the discharge port.
When cutting grass alone, the bottom of the screen can be pulled out.
New type of straw kneading machine New type of straw kneading machine New type of straw kneading machine 4 Installation and debugging
The machine should be placed on a flat and solid site when working.
Equip and install the motor according to the regulations.
Before installing the belt, you should first check whether the rotation direction of the traction power is consistent with the cutting direction of the mower. After confirming that it is correct, adjust and install the belt and tighten the belt appropriately.
Before starting, the gap between the moving and fixed knives of the mower should be checked and adjusted so that the gap is adjusted to be below millimeters without collision, and then the bolts are tightened.
After confirming that the adjustment of each part is normal, turn on the power and do a test run. Check whether the fastener links of each part are loose and whether there are any abnormal sounds in the rotating parts.