Nanning Sanle Solar After-sales Maintenance Phone Number "Regular Cleaning Makes You More Reassured"

Nanning Sanle Solar After-Sales Service Hours Repair Call or
Nanning Sanle Solar Water Heater Maintenance Service Center provides Nanning Sanle Solar Water Heater Repair, Cleaning, and Maintenance Service. It is convenient and quick to answer the Nanning Sanle Solar Water Heater after-sales repair service call. Professional technology, fast service and perfect after-sales service relieve users' worries.
When using solar water heaters, especially in winter, you should pay attention to the following points.
Before entering winter, you should check whether the insulation pipes are well insulated and whether there are any leaks or cracks in the outdoor pipes.
Secondly, after using the hot water if the pipe is equipped with a drain valve, you should immediately close the drain valve and open the hot water nozzle to drain the accumulated water in the upper and lower water pipes.
Thirdly, even if there is no water in the vacuum tube for more than an hour in the severe winter, water must not be replenished to prevent the tube from exploding.
During the fourth severe winter, if there is no one living in the home, the water in the outdoor pipes should be drained, the main water valve should be closed, and the handle of the water mixing valve should be placed in the warm water level and open.
Finally, insulation measures should be taken for water and sewer pipes. If you encounter other problems, please contact the maintenance department in time to find specialized personnel for repair.
Solar energy generally refers to the radiant energy of sunlight. The atomic nuclear reaction that fuses hydrogen into helium inside the sun continuously releases huge energy and radiates energy into the universe. This energy is solar energy. This nuclear fusion reaction inside the sun can last for billions to tens of billions of years. The radiation power emitted by the sun into space is one billionth of the radiation value reaching the earth's atmosphere. The solar energy that reaches the earth's atmosphere is reflected and absorbed by the atmosphere, and the rest reaches the earth's surface with a power of . In other words, the energy that the sun shines on the earth every second is equivalent to the heat released by burning ten thousand tons of coal. In a broad sense, solar energy is the source of many energies on the earth, such as wind energy, chemical energy, water potential energy, etc. Solar energy in a narrow sense is limited to the direct conversion of photothermal photoelectricity and photochemistry of solar radiation energy.
Use solar cells to convert the energy contained in sunlight into electrical energy through photoelectric conversion. Use solar water heaters to use the heat of sunlight to heat water and use hot water to generate electricity. Use solar energy to desalinize seawater. At present, the use of solar energy is not very popular. Solar power generation still has the problem of high cost and low conversion efficiency. However, solar cells have been used to provide energy for artificial satellites.
There should be no debris around the Sangle Solar to eliminate the hidden danger of hitting the vacuum tube.
After the Sangle solar installation is fixed, do not move or disassemble it without authorization to avoid damaging key components.
Due to increased dust in winter and less rain, snow or dust covering the collector will reduce the heat collection efficiency. Vacuum tubes need to be wiped frequently to increase heat collection efficiency.
Observe the status of the Sanle solar host frequently to see if the Sanle solar bracket is loose, whether the vacuum tube is damaged, whether the water tank is intact, whether the exhaust overflow pipe is unobstructed, whether it is frozen, and whether the upper and lower water pipes are separated from the insulation layer.
The above is what you need to pay special attention to when maintaining your Sanle solar energy in winter. I hope it will be helpful to you!
How to use: Nanning Sanle Solar Maintenance Center phone number
Solar water heating is fully automatic, so the user does not need to do any operations. The user can use the keys to adjust the Beijing time and the all-weather scheduled water supply and scheduled heating time. Use the left and right keys to select the adjustment item. Use the up and down keys to adjust parameters. Press the button to confirm. Press the water heating and heat preservation cycle key to start the corresponding function. After the water supply heating and heat preservation cycle is started, the user can use the keys to adjust the time. The icon flashes. The user can restore all parameters of the all-weather mode to the original factory settings by continuing to hold down the key.
Second Maintenance
Do not let water directly wash the measuring and control instrument. Check whether various connections are reliably connected.
Three precautions
There should be no water in the water tank for a long time to avoid overheating of the solar energy caused by drying in the air. Protect the solar water heater and water temperature and level sensor
To prevent accidental problems such as incorrect operation, abnormal power supply and control failure, which may cause long-term damage. The time overflow solenoid valve and solar water heater must be installed in a place where water will not leak into the room or cause accidents due to injection. If a return pipe is installed, it must be connected to a reliable drainage pipe, and reliable lightning protection measures must be installed to prevent lightning strikes. When lightning occurs, you should immediately disconnect the power supply and stop using solar energy to pay attention to personal safety. The measurement and control instrument has a leakage protection function. When using water, the user only needs to press the heating button to turn off the heating and the heating pattern goes out. You can use it with confidence without unplugging the power plug.
Nanning Sangle Solar After-sales Maintenance Phone Number