[Low price direct supply] Various high-strength cooling tower nozzles, ABS small three-splash nozzles

Taking the working process of the fiberglass circular cooling tower as an example, the hot water is pumped in the main machine room through the water pump at a certain pressure through the cross throat, curved throat and center throat of the pipe to press the circulating water to the water distribution system of the cooling tower through the water distribution pipe. The small holes spread water evenly on the filler. The dry, low-humidity air enters the tower from the bottom air inlet net under the action of the fan. When the hot water flows through the filler surface, a water film is formed and the air exchanges heat with high humidity and high humidity. The hot air pumps out the cooling water from the top and drips into the bottom basin and flows into the main unit through the outlet pipe. Under normal circumstances, the air entering the tower is dry air with low wet bulb temperature. There is an obvious concentration difference and kinetic energy pressure difference of water molecules between water and air. When the fan is running, water molecules continue to flow into the air under the action of the static pressure in the tower. The average kinetic energy of the remaining water molecules that evaporate into water vapor molecules will decrease, causing the temperature of the circulating water to drop. From the above analysis, we can see that evaporative cooling has nothing to do with the temperature of the air being lower or higher than the water temperature. As long as water molecules can continue to evaporate into the air, the water temperature will decrease. But the evaporation of water into the air will not continue endlessly. When the air in contact with water is not saturated, water molecules continue to evaporate into the air. But when the air on the water-vapor contact surface reaches saturation, the water molecules cannot evaporate but are in a state of dynamic equilibrium. The number of water molecules evaporated is equal to the number of water molecules returned from the air to the water. The water temperature remains constant. It can be seen that the drier the air in contact with water, the easier it is to evaporate and the water temperature is easier to decrease.
A professional enterprise that produces FRP cooling towers, FRP fans, FRP water tanks, cooling tower fillers and other FRP products. The leading product is the FRP cooling tower series. The products are divided into circular counterflow cooling towers, FRP square counterflow cooling towers, FRP square cross-flow cooling towers, filler-free spray cooling towers, concrete steel structure cooling towers, large FRP cooling towers
Zao Qiang County Runyuan FRP Co., Ltd. is one of the province's largest professional manufacturers of various FRP products for central air-conditioning. It can independently design, manufacture and install central air-conditioning projects
The main product grille series FRP grating Grid trench cover Pultruded grating cover Grid Sand grating Double-layer microporous grating
Profile series FRP guardrail equipment fence cable bridge FRP ladder FRP platform
Environmental protection series acid mist purification tower FRP desulfurization Dust collector adsorption tower, washing tower, gas hood, chimney maintenance, etc.
Water tank series FRP water tank water tank enamel water tank stainless steel water tank
Cooling tower series square FRP cooling tower round FRP cooling tower cross flow cooling tower industrial cooling tower< br/>Packing series Oblique folding filler Point wave cold filler Horizontal folding filler Differential positive rotation wave filler Two-way wave filler Wave filler Filler oblique angle filler Glass fiber reinforced plastic filler Honeycomb filler
Fan series Centrifugal fan Axial flow fan Rooftop Fan diagonal flow fan smoke exhaust fan wall axial flow fan
Molded series manhole cover pipe fittings joint axial flow fan blade
Wrapping series pipe tank cable tube
Central air conditioning series series fan coil series combined type Air conditioning unit series, fresh air unit series, aluminum alloy air outlet series, fire control valve series, exhaust fan, silencer, cooling tower, power filler, ventilation duct, etc. A series of new products with various specifications.
Friends from all walks of life are welcome to visit, guide and negotiate business.