Supply steel plastic geogrid

Steel-plastic
Geotechnical
Grating
It is composed of steel-plastic reinforced strips through a novel process
Because the surface of the steel-plastic grille is pressed into a regular shape Coarse pattern
Paved in the filling soil layer, it withstands huge stress resistance and friction with the filling soil
Steel-plastic geogrid restricts the overall
foundation
Soil shear
Side extrusion and bulging
Due to the greater stiffness of the reinforced soil cushion
it is conducive to the diffusion of the upper foundation load and its more even transmission
Distribution to the bottom Lying on the soft soil layer
It better improves the bearing capacity of the foundation
Due to the role of the reinforced soil cushion layer
It increases the overall stiffness of the foundation within the compression layer
Yes It is helpful to adjust the deformation of the foundation
The reinforced soil composite cushion formed by using steel-plastic grating is a flexible structure
It can absorb the energy of earthquake very well
Therefore, it has good earthquake resistance
br/> Steel-plastic geogrid has a certain tensile force and has strong tensile resistance during specific applications.
The tensile force of the steel-plastic geogrid is borne by warp and weft woven high-strength
steel wires
which can produce extremely high tensile modulus under low strain. The synergy of the longitudinal and transverse ribs gives full play to the grid's effect on The interlocking effect of soil.
Steel-plastic composite
Geogrid
High-strength steel wire is passed through
high-density polyethylene
and wrapped into high-strength strips at right angles to the plane's longitude and latitude.
Geosynthetics formed by ultrasonic welding
Steel-plastic
The grid combines the low elongation of steel wires and the corrosion and aging resistance of polypropylene, which solves the corrosion problem of steel and determines its wide range application and market prospects.
The steel-plastic grating can overcome huge tensile forces during use, and to a certain extent has advantages over other products. Steel-plastic composite
The tensile strength of the grating
is made of high-strength warp and weft woven The steel wires are responsible for producing extremely high tensile modulus under low strain capacity. The longitudinal and transverse ribs work together to fully exert the interlocking effect of the grid on the soil.
The steel wires of the longitudinal and transverse ribs of the steel-plastic composite grating are woven into the outer wrapping layer of the mesh. The steel wires and the outer wrapping layer can coordinately interact with each other and have a very low elongation at failure. The main force-bearing unit of steel-plastic composite geogrid is steel wire with extremely low creep.
Through the treatment of the plastic surface during the production process, rough patterns are pressed to enhance the roughness of the grid surface and improve the friction coefficient between the steel-plastic composite geogrid and the soil.
The width of steel-plastic composite grating can reach
to achieve efficient and economical reinforcement effect.
The steel-plastic composite grating is made of
high-density polyethylene
which can ensure that it will not be corroded by acid, alkali, salt solution or oil at normal temperature and will not be dissolved by water or invaded by microorganisms. . At the same time, the polymer properties of polyethylene are sufficient to resist aging caused by ultraviolet radiation. After the grating is stressed, the vertical and horizontal ribs work together to prevent the nodes from being cracked or damaged. In actual engineering, after the filler is compacted, it is not corroded by ultraviolet light and oxygen, so it can fully meet the requirements of permanent engineering construction.
Steel-plastic
Grid features
High strength, low creep, adaptable to various environmental soils, fully suitable for the use of tall retaining walls in high-grade highways.
It can effectively improve the interlocking and interlocking effect of the reinforced bearing surface, greatly enhance the bearing capacity of
the foundation
, effectively restrain the lateral displacement of the soil, and enhance the stability of the foundation.
Compared with traditional
grating
, it has the characteristics of high strength, strong bearing capacity, strong corrosion resistance, anti-aging, friction coefficient, large holes, uniform construction, convenient construction and long service life.
More suitable for deep sea operations. Embankment reinforcement fundamentally solves the technical problems of low strength, poor corrosion resistance and short service life caused by gabions made of other materials due to long-term erosion by sea water.
It can effectively avoid construction damage caused by being crushed and damaged by machines during the construction process
The steel-plastic grating is made of high-strength steel wires wrapped by high-density polyethylene into high-strength strips at right angles to the plane's longitude and latitude. Geosynthetic materials formed by ultrasonic welding use different mesh diameters and number of steel wires to change the tension of the ribs according to project needs.
Characteristics of steel-plastic grating
The tensile force of the steel-plastic grating is borne by warp and weft woven high-strength steel wires, which produce extremely high tensile modulus under low strain capacity. The synergy of the longitudinal and transverse ribs gives full play to the impact of the grating on the soil. The interlocking effect of the body.
The steel wires of the longitudinal and transverse ribs of the steel-plastic grating are woven into the outer wrapping layer of the mesh. The steel wires and the outer wrapping layer can coordinately interact with each other and the elongation at failure is very low. The main force-bearing unit of steel-plastic composite geogrid is steel wire with extremely low creep.
Through the treatment of the plastic surface during the production process, rough patterns are pressed to enhance the roughness of the grid surface and improve the friction coefficient between the steel-plastic composite geogrid and the soil.
The width of steel-plastic grating can reach
to achieve efficient and economical reinforcement effect.
The high-density polyethylene used in the steel-plastic grating can ensure that it will not be corroded by acid, alkali, salt solution or oil at normal temperature and will not be dissolved by water or invaded by microorganisms. At the same time, the polymer properties of polyethylene are sufficient to resist aging caused by ultraviolet radiation. After the grating is stressed, the vertical and horizontal ribs work together to prevent the nodes from being cracked or damaged. In actual projects, after the filler is compacted, the geotextile is not corroded by ultraviolet light and oxygen, so it can fully meet the requirements of permanent engineering construction