FRP valve cover FRP removable thermal insulation valve shell valve insulation cover

Characteristics of valve insulation sleeve
*
●
Acid and alkali resistance
The fiberglass material determines the acid and alkali resistance of the product. When the valve flange gasket is damaged and leaks, the acid or alkali resistance flowing out will Alkaline media cannot cause any damage to the protective case, and it can be used again after cleaning.
●
Fire-resistant
The insulation layer of the insulation cover is made of aluminum silicate ceramic fiber needle-punched blanket. The safe operating temperature is
℃
The outer protective shell is made of non-combustible Type FRP, the softening point is above
℃
, far exceeding the design temperature (ambient temperature
+
℃
) standard of the insulation surface. The oxygen index is greater than or equal to
, fully meeting the technical requirements of the electric power, petrochemical, and metallurgical industries.
●
Impact Resistance
The protective shell of traditional metal sheet products is easily deformed after being accidentally impacted or extruded from the outside, and is irreducible, seriously affecting the appearance of the product. FRP products Compared with traditional metal sheet products, its impact resistance is reflected in its higher rigidity and toughness. It can still maintain good appearance and physical properties after being subject to strong accidental impact or extrusion from the outside.
●
Anti-aging
Fiberglass has strong stability and can maintain its various physical properties for a long time during normal use.
●
Beautiful and elegant
●
br/>Each valve insulation sleeve is measured on-site and designed according to the actual size of the valve. It is very similar to the shape of the valve, with a smooth appearance and beautiful appearance.
●
Convenient construction
The installation of the insulation sleeve is very convenient. After the pipe insulation is completed, the insulation sleeve is transported to the site, the opening is made according to the size and shape of the interface, and then the two halves of the insulation sleeve are buckled On the insulated valve, just tighten the bolts.
●
Can be used repeatedly
When the valve needs maintenance, open the bolts on the outside and remove the insulation sleeve. When the maintenance is completed, re-buckle the insulation sleeve on the insulated valve and tighten it. Just bolt. Each insulation sleeve leaves room for the valve's packing gland screws to operate, which makes it more convenient when the packing needs to be tightened and does not require disassembly and assembly of the insulation sleeve.
Product technical specifications
Insulation performance implementation

Industry standards
Other implementation factory standards
/
Installation method:
, inspection Whether the insulation of valves and pipes meets the installation conditions.
Check whether the surface of the insulation cover is intact.
, measure the size of the interface and draw the outline on the insulation jacket shell.
. Cut along the contour line. After completion, open the insulation cover to trim the defects.
. Fasten the insulation sleeve on the valve to be insulated, tighten the bolts, and complete the installation.
Notes

Due to the complex conditions at the construction site, do not open the packaging of the product before using it to avoid contamination or collision.

When installing the product, place the product on a clean and flat work mat. Avoid dragging to prevent scratches on the surface of the product.
3
After the product is installed and before it is officially put into production, it should be covered with dust-proof cloth to avoid contamination or damage caused by other types of work.
. When disassembling again, place the removed insulation cover on the pre-paved cleaning mat in an orderly manner. Pay attention to ensuring that the product number is clear to avoid finding the corresponding location during installation.
Are you a manufacturer?
Answer: We are a manufacturer and we have our own factory in Hebei.
How is the quality of your products?
Answer: Our products are used by users all over the country. Some products are exported to the United States, Germany, Europe and other major countries. The raw materials used are of high quality and quantity, and are genuine at a reasonable price, so please rest assured about the quality of the products.
What are your prices?
Answer: Our products are mid-to-high-end products. Please believe that you get what you pay for. We sell directly from the manufacturer, eliminating all intermediate links and allowing our customers to enjoy real price advantages.
Can you do custom processing?
Answer: Yes, you can provide us with a drawing or we can make it custom-made for our customers.
When can you ship the goods?
Answer: The general construction period is 3-days for delivery. Large quantities of products may be ordered later.
What is your after-sales service like when there are quality problems with your company’s products?
Answer: There is no reason to return or exchange the goods, and we will bear the return freight.
Zaoqiang County Runyuan FRP Co., Ltd. is one of the province's largest professional manufacturers of central air conditioning and various fiberglass products. It can independently design, manufacture and install central air conditioning projects< br/>Main products: Grating series: FRP grating, trench cover, pultruded grating, cover grating, sand-paved grating, double-layer microporous grating
Profile series: FRP guardrail, equipment Fences, cable trays, FRP ladders, FRP platforms
Environmental protection series: acid mist purification tower, FRP desulfurization dust collector, adsorption tower, scrubber, gas collecting hood, chimney, maintenance, etc.
Water tank series: FRP water tank , water tank, enamel water tank, stainless steel water tank
Cooling tower series: square fiberglass cooling tower, round fiberglass cooling tower, cross flow cooling tower, industrial cooling tower
Packing series: oblique corrugated filler, point wave Cold filler, horizontal folding filler, differential sine wave filler, two-way wave filler, wave filler filler, oblique angle filler, fiberglass filler, honeycomb filler
Fan series: centrifugal fan, axial flow fan, roof fan , diagonal flow fans, smoke exhaust fans, wall axial flow fans
Molded series: manhole covers, pipe fittings, axial flow fans, blades
Wrapping series: pipes, tanks, cable tubes
Central Air conditioning series: series of fan coil units, series of combined air conditioning units, series of fresh air units, series of aluminum alloy air outlets, series of fire control valves, series of exhaust fans, mufflers, cooling towers, power fillers, ventilation ducts, etc. 3 series. New products in various specifications.
Friends from all walks of life are welcome to visit, provide guidance and negotiate business.