Walking corn stalk baler

型号：

SL7010

功率：

30马力

产量：

6亩

Supporting power:
-horsepower
Output:
mu
Product specifications:

Type:
Baler
Applicable objects ：
Pigs, cattle, sheep, horses, donkeys, mules, rabbits
Dimensions:
**
Usage:
Livestock product processing machinery
Brand:
Shenglong
Model:


The Shenglong brand walking baler is a new type of agricultural machinery developed by our factory, and is combined with the actual situation of my country's agricultural harvest. conditions and characteristics, developed. It can perform baling operations on various wheat straw, rice straw, pasture and weeds. It can be matched with any power or horsepower, and is mainly composed of a grain pickup, a mowing drum, a sprocket transmission mechanism, a rope box, a rope guide rod, an early warning device, a hydraulic control mechanism and other components. When baling, it automatically leads the rope, automatically picks up the wheat straw, automatically bundles, and automatically cuts the rope. It can also adjust the size of the groove wheel to change the rope loop and bale density during baling, so that the straw bale is not messy.
Working process of the baler: The power output shaft of the tractor inputs the power of the tractor to the input shaft of the baler through the universal transmission shaft, and drives the rolling roller mechanism and grass picking mechanism through the sprocket and chain respectively. Use the tractor The hydraulic output interface controls the expansion and contraction of the cylinder piston to realize the bale placing operation. The tractor pulls the picking and bundling machine to ride on the straw that has formed into ridges after receiving the goods. As the tractor moves forward, the power output shaft is hooked up, and the picking mechanism that has been pre-adjusted to the appropriate height begins to rotate, picking up the straw and feeding it into the roll. Pressing chamber, with the continuous rotation of the bundling machine drum, the straw entering the rolling and pressing chamber gradually changes from small to large to form a tight round bundle. When the bale reaches the predetermined density, the bale expansion switch is automatically turned on, the alarm horn sounds, the driver stops the tractor, pushes the rope feeding clutch, and the rope feeding starts. When it is found that the rope feeding is accelerating, the clutch is released, and the tractor power output shaft continues to rotate. The rope tying begins. After a predetermined number of turns, the rope is automatically cut and the rope tying ends. The driver pulls the hydraulic operating lever to reverse the direction of the hydraulic valve, the oil cylinder works, the rear frame opens, and the straw bale is thrown out. After the bale is released, the hydraulic valve is reset, the rear frame is closed, one cycle ends, the tractor continues to move forward, and picking begins the next cycle.