Year1
- 外观：
- 无色透明液体
- 气味：
- 无特殊气味
- 执行标准：
- 国家标准GB18582-2001
wood mold removal and sterilization liquid
board mold remover
wood products mold remover
packaging box mold remover
pallet mold Eliminator
1. Product introduction:
Mujiebao-wood mold eliminator is a low-cost wood-specific mildew and blue stain remover newly developed by Weixin Linhua based on market demand. , It has the characteristics of fast mold elimination, does not destroy the strength of wood fiber, does not change the original color of wood, is non-toxic and has no irritating smell, is safe and environmentally friendly, and is mainly used for wood dampness caused by high temperature and humidity in the rainy season or due to wood storage. Mold and mildew spots that appear on boards, wooden craft products, packaging boxes, pallets, furniture boards, etc. due to high moisture content caused by improper drying and not timely drying. The color of the treated wood can restore the original color of the wood. The treated area can ensure that there will be no secondary growth of mildew permanently and a series of advantages. Mujiebao-wood mold eliminator is currently the most effective, economical, deepest penetration, and most convenient to use new type of wood-specific eliminator on the market. Mold elimination products
2. Main ingredients:
The main ingredients of Mujiebao-wood mold elimination agent are: mold decomposition oxidant, mold removal reducing agent, surfactant, compound antibacterial agent, etc. Do not contain formaldehyde, heavy metals and other toxic and harmful substances. Comply with the new European export standards
3. Scope of application:
Mujiebao-wood mold eliminator is mainly suitable for moisture in wood caused by high temperature and humidity in the rainy season or improper storage of wood. , the removal of Trichoderma, Penicillium, Aspergillus niger caused by high moisture content caused by untimely drying, the removal of Aspergillus flavus, white rot, Mucor and other mold hyphae caused by high flour protein added to plywood glue. , which is widely used in wood materials such as boards, furniture, wooden crafts, packaging boxes, pallets and other finished products and semi-finished products
Four: Implementation standards:
National standards
Five: How to use:
Before operation, first clean the attachments on the wood surface. You can use brushing, spraying, soaking, vacuum pressurization and other operating methods: spots and other phenomena, when using the brushing method: Use a brush or sponge to evenly apply Mujiebao-Wood Mold Eliminator (it can be diluted with water appropriately according to the mildew situation. The dilution ratio is one part mildew remover to one part water. When operating, The standard is that the wood surface is completely wetted), and the whole thing is covered with a plastic sheet (preservation film). Place it in a well-ventilated place to cool and dry naturally for an hour. After the wood mildew is eliminated, subsequent processing can be carried out
,
When the wood mold is severe, the mildew cycle is long, the surface is moldy, or the wood mold mycelium has completely penetrated into the wood fiber conduit, it must be treated twice. When using the brushing method: Use a brush or sponge to evenly apply Mujiebao-Wood Mold Eliminator Stock Solution one time (the interval between each application is an hour. When operating, the wood surface is completely wetted as a standard), and the entire surface is covered with plastic. Cover with cloth (preservation film) and let it cool and dry naturally in a well-ventilated place for an hour. After the wood mildew is eliminated, subsequent processing can be performed
,
For the slight mildew that has just appeared on the wood surface, Mildew spots, mildew spots and other phenomena - when using the soaking method - water can be diluted appropriately according to the mildew situation. The dilution ratio is one part mildew remover to one part tap water. The soaking time is about 3 minutes. The mildew spots will disappear and the original color of the wood will be restored
,
In case of wood moldy conditions, when the mildew cycle is long, the surface is rotten or the wood mold hyphae have completely penetrated into the wood fiber conduits, the soaking method is used -According to the mildew situation, it can be appropriately diluted with water. The dilution ratio is one part mildew remover to one part tap water. The soaking time is about 3 to 3 minutes before the wood mildew spots disappear and the original color of the wood is restored.
6: Precautions:
,
Because this product is a polymer treatment agent, please avoid mixing it with reducing, acidic, alkaline, organic solvents and other substances
,
If necessary When dealing with painted products, please be sure to clean the paint film on the wood surface before using this product
,
This agent can be recycled. When using the soaking method, please ensure that the agent completely covers the wood. At the same time, ensure the fluidity of the agent so that the agent can completely penetrate into the wood. It is recommended that the number of times of the potion treatment product should not be blended more than once. If you continue to use it, it is recommended to add no less than the total amount of the original drug for reactivation. Treatment to ensure that this agent continues to be effective
,
This product will crystallize when the temperature is below ℃. Please store it in a place above ℃ or in a cool place to avoid direct sunlight or high temperature. To ensure product efficacy and stability
,
Effective use period at room temperature: months
WhatsApp
