Muzhibao-concentrated board softener

外观：

无色透明液体

气味：

无特殊气味

PH值：

10～12

Muzhibao - Concentrated Board Softener
Muzhibao - Concentrated Board Softener is a new type of high-efficiency board softener newly developed by Weixin Linhua. It is mainly used for boards with a thickness of less than 1 cm. Thick solid wood boards are softened and bent, and processed by profiling and bending. The softened boards can effectively improve the board's compressibility along the grain and parallel extension. As a result, the board has good bending and stretchability. Muzhibao - Concentrated board softener is easy to operate, does not change the original color of the board, has a large R angle for softening and bending with high efficiency, a small R angle for softening and bending and is not easy to break, and the softened board has good dimensional stability and is not easy to deform and rebound in size ( Internal buckle or external tension), small usage in operation, low overall cost of use and a series of advantages. It is widely used in the softening and profiling bending processing of solid wood dining chair backs, solid wood bedside bends, solid wood table legs, solid wood armrests, mahogany furniture accessories, special-shaped solid wood craft products, etc.
1. Physical and chemical properties of the product:
, Appearance: colorless transparent liquid
, Value~
Specific gravity
, Odor: odorless
, Active ingredients:
, Solubility: easily soluble in water
, Thermal decomposition temperature: ℃
, Chemical composition: Oxygen-modified mixture
2. Scope of application:
Mu Zhibao -Concentrated board softener is mainly suitable for softening rubber wood, oak, manchurian ash, chun, birch, oak, pine, mahogany and other tree species less than 1 cm thick. It is widely used in solid wood dining chair backs and solid wood bedsides. , solid wood table legs, solid wood armrests, mahogany furniture accessories, special-shaped solid wood craft products, etc. Softened bending and profiling bending treatment.
3. Usage:
It is recommended to directly dilute Muzhibao-concentrated board softener and water into an aqueous solution with a concentration of - and then proceed to heating, steaming or cold water immersion (specific heating and cooking time or cold water immersion) The time should be determined by the actual thickness of the bent plate and the tree species. Different tree species have different density and hardness, so the heating and cooking time or the cold water soaking time are also different. For details, please refer to the processing technology and processing parameters in the product trademark column). It can be directly heated and steamed or soaked in cold water for high-pressure steaming. When using steam or thermal oil to pass heat through the mold for bending, it is recommended to preheat the mold to a temperature not lower than 10 degrees Celsius. When using high-frequency mold heating for bending, it is recommended that the holding time be appropriately extended by minutes based on the actual thickness of the plate.
4. Notes:
, Muzhibao - concentrated board softener can be reused after dilution with water. Be careful not to throw it away after use to avoid waste
, boards are heated and steamed During the softening process, please ensure that the softened plate is bent when the temperature is not lower than 10°C. It is suitable for large-volume continuous operations (steam, thermal oil, high frequency).
When softening and bending solid wood panels with a thickness of more than 1 cm but less than 1 cm thick, it is recommended to extend the holding time by 10 minutes to ensure its dimensional stability.
, In case of accidental drinking, drink plenty of water, do not force vomiting, and go to the hospital
, Effective use period: months