Concentrated wood mildew remover

外观：

无色透明液体

执行标准：

国家标准GB18582-2001

常温下有效使用期限：

12个月

Concentrated Wood Mildew Remover
1. Product Introduction:
Muzhibao-Concentrated Wood Mildew Remover is a high-content wood mildew remover newly developed by Weixin Linhua. It has fast mold elimination speed, does not destroy the strength of wood fiber, does not change the original color of wood, is non-toxic and has no irritating smell, is safe and environmentally friendly, and is mainly used for wood dampness or moisture caused by high temperature and humidity in the rainy season. Mold and mildew spots that appear on boards, wooden craft products, packaging boxes, pallets, furniture boards, etc. due to high moisture content caused by improper storage of wood and delayed drying. The color of the treated wood can restore the original color of the wood. , its treated area can ensure a series of advantages such as permanent mildew secondary growth. Muzhibao-concentrated wood mildew remover is currently the most effective, highest content, strongest penetration depth, and most used on the market. Convenient concentrated wood mildew removal product
2. Main ingredients:
The main ingredients of Muzhibao-concentrated wood mildew remover are: mold decomposing oxidant, mold removal reducing agent, surfactant, compound antibacterial The agent does not contain formaldehyde, heavy metals and other toxic and harmful substances. It complies with the new European export standards
3. Scope of application:
Muzhibao - concentrated wood mildew remover is mainly suitable for high temperatures and high humidity during the rainy season. Trichoderma, Penicillium, Aspergillus niger, Aspergillus aflatoxin, and white rot fungus are caused by high moisture content of wood caused by moisture or improper storage of wood or delayed drying. , the removal of mold hyphae such as Mucor, which is widely used in boards, furniture, wooden handicrafts, packaging boxes, pallets and other finished products, semi-finished products and other wooden materials
Four: Implementation standards: National standards
Five: How to use :
Before operation, first clean the attachments on the wood surface. You can use brushing, spraying, soaking, vacuum pressurization and other operating methods:
For the slight mildew and mildew spots that have just appeared on the wood surface, Mildew spots and other phenomena, when using the brushing method: Use a brush or sponge to evenly apply Muzhibao-Concentrated Wood Mildew Remover (can be appropriately diluted with water according to the mildew situation, the dilution ratio is one part mildew remover to one part water During operation, the wood surface should be completely wetted (standard), and the entirety should be covered with plastic sheeting (preservation film). Place it in a well-ventilated place to naturally cool and dry for an hour. After the wood mildew is eliminated, subsequent processing can be carried out
. When the wood mold is severe, the mold cycle is long, the surface is moldy, or the wood mold mycelium has completely penetrated into the wood fiber conduit, it must be treated twice. When using the brushing method: Use a brush or sponge to evenly apply Muzhibao - Concentrated Wood Mildew Remover Stock Solution - times (the interval between each application is hours). During operation, the wood surface is completely wetted as a standard. Cover it with plastic sheet (preservation film) and place it in a well-ventilated place to cool and dry naturally for an hour. After the wood mildew is eliminated, it can be processed later
For the slight mildew, mildew spots, etc. that have just appeared on the wood surface. Mildew spots and other phenomena - when using the soaking method - water can be diluted appropriately according to the mold situation. The dilution ratio is one part mildew remover to one part tap water. Soak the wood for about 3 minutes. The mildew spots on the wood will disappear and the original color of the wood will be restored.
. When the wood moldy situation is severe and the moldy cycle is long, the surface is rotten or the wood mold mycelium has completely penetrated into the wood fiber conduit, when using the soaking method - water can be appropriately diluted according to the mildew situation, and the dilution ratio Soak 3 parts of tap water for one part of mold remover. The soaking time is about 3 to 3 minutes before the wood mildew spots disappear and the original color of the wood is restored
Six: Precautions:
Because this product is high Molecular treatment agents, please avoid mixing them with reducing, acidic, alkaline and organic solvents
. If you need to treat painted products, please be sure to clean the paint film on the wood surface before using this product
br/> This agent can be recycled. When using the soaking method, please ensure that the agent completely covers the wood and ensures the fluidity of the agent so that the agent can completely penetrate into the wood. It is recommended that the number of times of the agent be blended each time should not exceed If you continue to use it, it is recommended to add no less than the total amount of the original drug for reactivation to ensure that the drug continues to exert its effect
. If the temperature is lower than ℃, the product will crystallize. Please leave it aside during storage. In places above ℃, just place it in a cool place and avoid direct sunlight or high temperatures to ensure product efficacy and stability
. Effective use period at room temperature: months