Year1
- 厂家：：
- 山东济南联浩机械设备有限公司
- 厂家地址：：
- 山东省济南市工业北路东段供销商厦对过
- 厂家电话：：
- 130-1170-7319
Online:
Ding Le]
The fully automatic tofu machine refining and separation system consists of a motor, a separate refiner, and a pulp barrel. It is heated The pulp cooking system consists of a pulp suction pump, a heating steam drum, and a pulp cooking barrel. The electrical control panel consists of a voltmeter, an ammeter, and an AC. Individual switches control the refiner, pulp suction pump, and pulp cooking system steam respectively. The water level of the package can be observed through the water level gauge. It is equipped with a pneumatic double-press molding machine to press into tofu. The fully automatic tofu machine is made of high-quality stainless steel.
2. Features:
One machine with multiple functions: Lianhao tofu machine can produce soy milk, tofu curd, various tofu and other soy products at the same time. It can also be used with other equipment and processes to produce more bean products. products.
Clean and hygienic: Lianhao tofu machine is an all-stainless steel production equipment that complies with national food hygiene standards. It is neat, smooth and easy to clean.
Convenient and fast: Lianhao tofu machine only takes minutes from the soybean raw materials entering the machine to the finished product, and only one person needs to operate a piece of equipment, saving time, labor and effort, making it easy and convenient.
Maintain nutrition: Lianhao tofu machine uses ultra-high temperature steam to heat and cook the pulp, which effectively prevents protein damage and avoids the burnt taste of soy milk. It maintains the original nutrients and taste of soy milk, making it more delicious.
. Ready-made and sold now: Lianhao tofu machine can be made and sold on-site, with no backlog and no inventory. Consumers can witness the entire production process from soybeans to soy milk, and truly drink soy milk with confidence.
3. Operation method:
(1) Refining:
Before refining, check whether the water level of the steam drum reaches the highest level of the liquid level gauge, and pay special attention to the water level of the liquid level gauge dropping to the lowest level. The water level must be replenished immediately to the highest water level.
. Press the grinding switch and the indicator light will be on. Rotate the grinding water inlet valve. While adjusting the grinding water volume, put some soybeans into the hopper. The amount of water should be based on the loose bean dregs discharged from the slag outlet and no pulp. Then grind the soybeans into the hopper until the soy milk in the cooking barrel reaches the highest mark in the barrel. The amount of soy milk should not exceed the maximum cooking amount mark. Generally, the cooking amount is /3 of the volume of the barrel.
(2) Steaming and milk dispensing:
Close the lid of the milk bucket.
. Set the cooking temperature to generally ℃. Press the heating switch and the heating indicator light will turn on. When the soy milk temperature reaches the set point, the power supply will be automatically cut off, the heating indicator light will go out and heating will stop. The soy milk will be made.
Put the seasoning into the milk storage bucket in proportion, place a container under the milk outlet, and slowly open the milk outlet valve to release milk.
When discharging soy milk, a large amount of steam will be ejected and should be opened slowly to avoid burns.
(3) Cleaning and shutting down: After the soy milk has been put into the machine, clean it according to the following requirements.
, Refiner:
Open the grinding cover, clean the residue, scrub the inner shell of the refiner with a small amount of water and a rag, and it is strictly forbidden to rinse it directly with water. After cleaning, restore the refiner and hopper. Press the refiner switch and the grinding water inlet valve to grind for one minute.
, Slurry cooking barrel and steam pipe in the barrel:
Remove the steam pipe, drain the water to clean the slurry cooking barrel, clear the small hole in the steam pipe, clean it and install it. Every time you clean, you must pay attention to clearing the small holes in the steam pipe.
Shut down: After completing the above work, turn off the power switch, close the milk outlet valve, the grinding water inlet valve, the water inlet valve, and open the drain valve.
4. Fully automatic tofu machine production process:
Soybeans rrr material selection rrr soaking rrr grinding rrr filtering pulp rrr boiling pulp rrr dotting the brain rrr squatting the brain rrr breaking the brain rrr upper brain rrr pressure forming
/>. The purpose of the refining machine is to extract the protein from soaked soybeans to the maximum extent. The key is to master the thickness of the soybean milk. If it is too thick, it will affect the pulping rate. If it is too thin, a lot of fiber will enter the bean dregs together with the protein. On the one hand, it will cause clogging of the screen and affect the pulp filtration. On the other hand, it will make the quality of soy milk rough and the color dark. When refining, pay attention to adjusting the gap between the grinding wheels and adding an appropriate amount of water while abrasive.
The fully automatic slag loading machine is a professional tool used in the production process of soybean products. Generally, the pulp needs to be ground three times to completely grind the slurry in the soybean milk. Each grinding operation must be carried out manually. Stirring and adding slag to the refiner requires a lot of physical labor and the speed is slow. Using the automatic slag loading machine can automatically stir the slag and automatically pump the slag into the refiner, improving work efficiency and reducing labor intensity. There are two types of slag loading machines: single-cylinder slag loading machine. The single-cylinder slag loading machine pours the ground bean dregs into a barrel for stirring, and automatically extracts the slag for grinding. The double-cylinder slag loading machine does not need to go to the slag loading machine. The slag is poured into the barrel, and the pulp is refined three times in one go. There is no need to pour slag back and forth into the barrel, and the grinding process is completely automated.
The purpose of the pulp boiler is to use an electric heating boiler to steam-heat the ground pulp until it boils!
The tofu forming machine equipment is simple to operate, just master the strength and you can operate it!
5. Lianhao tofu machine service system
Lianhao tofu machine, return and exchange mechanism, large purchase guarantee ensures worry-free production! Modern technology and craftsmanship are carefully crafted, new technology products recognized by the people, merchants earn It’s full of food!
★Authentic guarantee: complete license procedures, franchisees can check the authenticity
★Reliable guarantee: many equipments, complete varieties, reliable and guaranteed quality
★Feasible guarantee: yes Bring your own raw materials for free on-site production
★Free guarantee: free training on production technology, and the headquarters will provide teaching and training
★Logistics guarantee: all store equipment transportation will be handled by you
★[Consultation hotline :
Online:
Ding Le】
WhatsApp
