Supply various types of through-type shot blasting machines and large steel shot blasting cleaning equipment

The roller conveyor shot blasting machine can work continuously and uninterruptedly to descale, clean and pretreat various steel materials, such as steel plates, steel products, steel beams, sections, steel pipes and steel castings, in a continuous passing manner. It is easy to operate. You only need to load the steel material into the machine and press the start button. After a short cycle, the system will automatically unload the processed material, which completes the entire cleaning process and removes all dust and residual pellets. material. .Cleaning room
The cleaning room is a large-cavity plate-type box-shaped assembly welding structure. The inner wall of the chamber is lined with wear-resistant protective plates. The cleaning operation is carried out in the sealed cavity.
.Conveying rollers are divided into indoor conveying rollers and loading and unloading section conveying rollers.
The indoor roller table is coated with a high-chromium wear-resistant sheath and a limit ring. The high-chromium wear-resistant sheath is used to protect the roller table and withstand the impact of projectiles. The limit ring can make the workpiece run in a predetermined position to prevent deviation. , causing an accident.
3. Elevator
It is mainly composed of upper and lower transmission, cylinder, belt, hopper, etc.
The upper and lower pulleys of the same diameter are made of ribs, wheel plates and hubs welded into a polygonal shape to enhance friction, avoid slipping and extend the service life of the belt.
Adjust the bolts on both sides of the upper shell of the elevator to drive the pull plate to move up and down to maintain the tightness of the elevator belt.
The upper and lower pulleys adopt outer spherical ball bearings with square seats, which can automatically adjust when subjected to vibration and impact, and have good sealing performance.
.Separator
The screw conveyor is mainly composed of a reduction motor, a screw shaft, and a screw shell.
Using an outer spherical ball bearing with a square seat, the bearing can automatically adjust when subjected to vibration and impact, and has good sealing performance.
.Pill conveying pipeline
This pill conveying pipeline has dual pill control functions. There is a gate above each gate pipe to cut off the projectiles from the separator respectively, making it easy to repair the respective shot blasting device gates. The opening size can adjust the flow of projectiles, and the number of gates can be opened and closed in any combination according to the specifications of the workpiece to be cleaned, so as to save energy, reduce wear and tear on the machine, and ensure that production needs are met.
.Shot blaster
Using a single disc shot blaster, it has become the most perfect high-level shot blaster in China today. It is mainly composed of a rotating mechanism, an impeller, a cover, a directional sleeve, a shot splitting wheel, a guard plate, etc. The impeller is made of forged material, and the blades, directional sleeve, shot splitting wheel and guard plates are all cast from high chromium materials. Cost
.Purge device
This device uses a high-pressure blower and is equipped with multiple sets of elastic blow nozzles at different angles in the auxiliary chamber inside the chamber to purge and clean the remaining projectiles on the surface of the workpiece.
.Inlet and outlet seals
The workpiece inlet and outlet sealing devices are all made of rubber. In order to prevent the projectiles from splashing out of the cleaning room during shot blasting, multiple reinforced seals are installed at the workpiece inlet and outlet. It is characterized by strong elasticity, long life and excellent sealing effect.