DKZ electric actuator DKZ-510CX

电压：

220V

输出扭矩：

16000NM

输出信号：

4~20mA

Electric actuator, ' r is one of the execution units in the electric unit combination instrument. Combined with the type servo amplifier, it accepts a unified - (or -) standard signal and converts the current signal into a corresponding linear displacement for automatic control
Adjusting valve
'r valve to complete the automatic adjustment task. Main features: Directly accept analog signals from the automatic control system, built-in servo amplifier and manual automatic regulator without the need for additional servo amplifiers.
' It is a switch type and an adjustment type.
, Linear stroke electric actuator type linear stroke actuator
. - Model

-

-

- < br/>
-

- Thrust

-

-

-
< br/> -

- Itinerary

-

-

-

-

-

-

-

-

-
< br/> -

-

-

-

-

- < br/>
-

- Full travel time

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-


Note: Indicates feedback signal -, without feedback signal - means with electrical limit. Special strokes can be customized according to user requirements
< 'Main features: Directly accept ~,~ or ~,~ analog signals from the automatic control and adjustment system, built-in
servo
and manual and automatic The regulator does not need to be equipped with a servo amplifier. The upper and lower limits, stroke, zero position and full scale of the actuator can be set on the actuator operation panel. , The CNC operation panel adopts digit digital tube display with high definition. During operation, the input opening and actual valve position opening can be displayed at the same time, providing convenience for on-site monitoring. , Control accuracy, the dead zone is from . to adjustable. , During the control process, it is equipped with interrupt signal self-locking and set value positioning functions. . It has fault self-diagnosis function. When a fault occurs, the operation panel can prompt the fault type. . This machine has an automatic processing function for control input signal errors (including interruptions and disconnections). The user can pre-set the valve position opening and closing according to system needs. , The servo motor is equipped with a variety of protection functions. , The communication output port can adopt pulse width modulation, analog quantity, etc. Please specify the output method and protocol type when ordering.