Botou supplies LS screw conveyor to ensure quality

Screw Conveyor
Screw Conveyor Product Overview:
The Type Screw Conveyor is designed and manufactured in accordance with the B/- "Screw Conveyor" standard and is a replacement product of the Type Screw Conveyor. The head and tail bearings are moved outside the shell. The hanging bearings use sliding bearings without dust-proof sealing devices. The bearing bushes are generally made of powder metallurgy. Felt bearing bushes are used to transport cement. The hanging shaft and the spiral shaft are connected by a slider. When disassembling the spiral, there is no need to move it. The driving device does not need to move the screw when disassembling the hanging bearing, and the hanging bearing can be lubricated without removing the cover. The whole machine has high reliability, long life, strong adaptability, and easy installation and maintenance. The main features of the
type screw conveyor are:
Large carrying capacity, safe and reliable.
Strong adaptability, easy installation and maintenance, and long life.
3. The whole machine is small in size and high in speed, ensuring fast and even transportation.
The discharge end is equipped with a cleaning device. The whole machine has low noise, strong adaptability, and flexible placement of the inlet and outlet.
Good sealing, the outer shell is made of seamless steel pipe, and the ends are connected to each other by flanges, which has good rigidity.
Working principle of type screw conveyor:
Type screw conveyor uses a rotating screw to push the transported materials along a fixed casing to carry out transportation work. The head and tail bearings are moved outside the casing. , The hanging bearing uses a sliding bearing with a dust-proof sealing device. The bearing bush is generally made of powder metallurgy. The felt bearing bush is used to transport cement. The hanging shaft and the spiral shaft are connected by a slider.
The type screw conveyor is a replacement product of the type conveyor. Our products have reliable performance, novel structure, advanced technical indicators, and a wide range of applications. They are not only easy to install and maintain, but also have low rotation resistance of the intermediate hanging bearing. It is small, has very good sealing performance and is wear-resistant. It is widely suitable for horizontal and slightly inclined conveying materials.
The driving device includes series reducer + series motor and gear reduction motor.
The screw conveyor is divided into two types according to the driving mode:
When the length of the screw conveyor is less than 3, it is driven by a single end.
When the spiral machine is larger than 3, it is driven by both ends.
The screw conveyor produced by Botou Huaying Environmental Protection Equipment Co., Ltd. has a simple structure, small cross-sectional size, good sealing, reliable operation and low manufacturing cost. It is mainly used for intermediate loading and unloading. The conveying direction is selectable, not only in the reverse direction, but also in both directions at the same time. Materials can also be stirred and mixed, heated and cooled during transportation. The material flow can be adjusted through the loading and unloading gate. However, it is not suitable to transport perishable, sticky, caking and large pieces of materials. During the transportation process, attention should be paid to preventing material breakage and wear of the spiral and trough. The unit power of our products is relatively large. Therefore, we must keep the seal and spiral of the troughs during use, so that there will be an appropriate gap between the troughs