LMF type pulsating backflush flat bag dust collector

>Type pulsating back-blowing flat bag dust collector
When the type pulsating back-blowing flat bag dust collector operates continuously, the rotating arm blows into the filter bags one by one, causing the bag wall to vibrate slightly at a frequency of ~ Hertz , to remove dust accumulation on the surface of the filter bag. The filter bag of the dust collector is rectangular or truncated diamond-shaped, and the filter bag is the longest. The maximum filtration area of a single machine is meters.
Compared with the pulse bag dust collector, the pulsating backflush flat bag dust collector has the following characteristics
The arrangement of the flat bag is more compact than that of the round bag. Within the same area, the filtration area of the flat bag arrangement is larger than that of the round bag. There are many bags, and due to the large action distance of the back-blowing air, long filter bags can be used. The current domestically produced pulse bag dust collectors use round bags, and the bag length of the rotary back-blowing flat bag dust collector can be up to ~ meters. For this reason, flat bags occupy a smaller area than round bags in terms of layout or bag length selection.
The dust collector is equipped with a high-pressure fan for back-blow cleaning, which is not limited by compressed air source conditions. It has few wearing parts, simple maintenance, and reliable operation, overcoming the shortcomings of compressed air pulse cleaning.
The dust bag chamber box is designed according to the flow pattern of a cyclone dust collector. The dust-laden airflow inlet enters in a tangential direction, which can act as a local cyclone. Coarse particles automatically settle into the ash hopper, reducing the load on the filter bag.
The dust collector adopts a cylindrical dome structure, which has uniform stress, high structural strength, and good anti-explosion performance. The top cover is equipped with a rotary uncovering device and an operating access hole. When replacing the filter bag, there is no need to remove the cover, just place it directly on the Top clean room operation improves maintenance conditions.
The differential pressure method is used to automatically control backflush cleaning, which can automatically adjust the cleaning cycle according to the dust concentration at the entrance, which is more reasonable and reliable than the scheduled cleaning of pulse bag dust collectors.