Year1
- 处理风量：
- 30000-40000m3/h
- 过滤风速：
- 0.8-1.2m/min
- 过滤面积：
- 800㎡
Boiler pulse dust removal equipment is a high-efficiency dust collector imported by our company from Germany with the technical level of the 1990s and combined with China's A new type of dust collector developed with characteristics. This dust collector uses a high-pressure (.~.) large-flow pulse valve to inject dust into the filter bags one by one. It can collect more than .% dust from the gas with high concentration (/) of a large amount of ultrafine dust (particle content above %). At the end of the year, it passed the provincial appraisal that the dust collector is at the domestic level and its main technology is the first in the country. At present, under the new national environmental protection standards, it is not only widely used for dust control in cement plants, but also widely used in the field of deep processing of non-metallic ore fine powder. It also has good application prospects in electric power, chemical industry, metallurgy, steel and other industries.
2. Structure and working principle of boiler pulse dust removal equipment:
, Boiler pulse dust removal equipment structure:
The equipment mainly consists of the following parts:
Box: including bag chamber, preheater Dust removal room, clean air room, porous plate, filter bag, filter bag frame. The cabinet is designed to withstand pressure.
Injection system: including main air pipe, injection pipe, pulse valve, and controller.
There are two forms of ash hopper and ash discharge part: one is that the ash hopper is directly connected to the ash discharge valve; the other is that the ash hopper is connected to the ash discharge valve through conveying equipment (such as a screw conveyor).
Working principle of boiler pulse dust removal equipment:
Dust-containing gas enters the expanded ash hopper of the dust collector for pre-dust collection and is evenly distributed between each filter bag through the guide plate. The dust is retained outside the filter bag. On the surface, in order to make the equipment resistance not exceed the high pressure gas, pulse jet is generated through the solenoid valve, so that the compressed air (.~.) in the air bag is ejected from the hole of the blow pipe (called primary wind), and the surrounding air is induced through the venturi tube to be several times the primary wind. (called secondary air) enters the filter bag and expands rapidly in an instant, shaking off the dust with the reverse direction of the air flow to achieve the purpose of dust cleaning. The microcomputer automatic control device is used to adjust the cleaning cycle and pulse injection time according to the dust to make the dust collector operate within a certain range.
WhatsApp
