BLS pulse bag dust collector dust removal equipment price dust collector standard design

处理风量：

10000m3/h

过滤风速：

2.5m/min

过滤面积：

320㎡

The pulse bag dust collector of Xianxian Yongsheng Environmental Protection Equipment Co., Ltd. is based on the problems existing in the use of many dust collectors. After repeated inspections, our factory leaders and technical departments have painstakingly researched and absorbed and digested the advantages of many water dust collectors and integrated them into one and adopted many Original technology has successfully developed a set of dust collectors that adapt to various sintering methods, adapt to various harsh conditions, and overcome the difficulties that other water dust removal cannot overcome. If you need consultation about pulse bag dust removal equipment, please call us: (Manager Li) < br/>Features of pulse bag dust collector:
Use double conical towers for dust removal so that muddy water does not contact the cylinder wall and prevents clogging caused by dust sticking.
The water spray head is installed outside the dust area so that it does not come into contact with the nozzle, which solves the problem of the dust collection effect being affected by the blockage of the nozzle and the inability to spray water.
The use of twin towers installed directly on the two chimneys of the shaft kiln avoids the resistance caused by the detour of the flue gas. Therefore, the resistance of the equipment is very low, without the need for induced wind and without the phenomenon of reverse smoke.
Use a large amount of water for dust removal to speed up the circulating water so that the water temperature is lower, which can solve the problem of pipeline structure, water evaporation, and poor dust removal effect.
Use recycled water to never discharge it into the kiln and waste water resources.
The sewage discharged after dust collection can be quickly separated from mud and water through a mud-water separator. The separated mud is continuously discharged to the twin-shaft mixer in the form of porridge and paste without any special equipment for mud discharge. The recovered mud is % recycled There is no secondary pollution problem caused by discharge to the ground.
The equipment has low operating costs and only low power consumption.
. Low investment. Compared with similar products, the investment is about 10,000 yuan per unit. Therefore, this technology is superior to existing various forms of water dust collectors to a large extent and ensures that the dust removal effect does not exceed that of open-fire kilns and that the dust emission concentration of dark-fire kilns does not exceed /.
Pulse bag dust collector
Technical performance
:
, processing capacity is/
, allowable dust concentration is within/
, dust removal efficiency is above .% The dust emission concentration is lower than the national implementation standard for Class II areas
, the sewage treatment volume/
, the water consumption./
, the electricity consumption when induced wind is required
, and the discharged mud contains Water volume %
, more than % can be removed after treatment
, recycling water utilization rate %
, recycling material utilization rate %