Year1
- 桶：
- 1元
- Composition features:
. ., '
- It is a two-component room temperature curing paint that integrates water resistance, oil resistance and static conductivity. The coating has low curing temperature, strong adhesion, excellent water resistance, acid resistance, alkali resistance, and oil resistance, and good electrostatic conductive properties. There is no leakage of static conductive additives after long-term use, the coating performance is stable, and there is no de-blistering and other phenomena. No pollution to oil products.
. ., '
- It can be used on the inner wall of finished oil storage tanks (especially aviation kerosene) in refineries and oil product stations, and can also be used on crude oil, sewage and other media.
. . '
- Good electrical conductivity, surface electronegative
-
-
. ., '
- Coatings are divided into primers and curing agents, primer
- components
-, curing agents
- components
-.
- Construction instructions:
- Surface treatment: The conductive anti-corrosion coating requires surface sandblasting, and the rust removal level should be
- specified
- level. Treated surfaces should be primed within
- hours.
- , Construction environment During construction, it is strictly forbidden to mix water, sand, gravel, cotton yarn and other foreign matter into the paint. If it encounters windy sand, rain, snow and heavy fog, construction must be stopped to ensure the quality of the coating.
- Before preparing and using the paint, the
- two components should be fully stirred evenly, and then stirred evenly before construction. When conditions permit, it is recommended to make a small sample first for proportioning testing.
- The construction method of electrostatic corrosion-conducting coating can be ordinary spraying, high-pressure airless spraying, brushing and other processes. The trial period of coating construction is generally no longer than four hours. When the temperature is high, the trial period of construction will be shortened accordingly, and the paint should be used as it is. The next coat can be applied when the previous coat of paint reaches surface dryness. After construction is completed, the spray gun, feeding pipe, paint brush, etc. should be cleaned in time with solvent to prevent residual paint from solidifying and affecting next use.
- When the viscosity of the thinner paint is too high, it can be diluted with the special thinner produced by our company. The dosage should not exceed the amount of paint
-.
-, Coating structure: It is recommended to use one base and three-sided coating structure for electrostatically conductive anti-corrosion coatings, coating dosage
- square meters, total dry film thickness of coating
-. A topcoat can be added to specially weighted areas.
- Curing time:
.
- Curing below ℃
- Days,
- Curing at ℃
- Days,
- Curing above ℃
- Days.
- Construction protection:
.- Workers should wear work clothes during construction and try to avoid skin contact with paint. Once the skin is stained with paint, it can be washed with soapy water. In severe cases, cotton gauze dipped in alcohol or gasoline can be used to wipe the skin. Do not wash your hands with thinner.
- Packaging: Components
- Bucket B Component
- Bucket
- Storage: The storage temperature should not be higher than
-℃, and should be stored away from fire sources , avoid rain and long-term exposure to strong sunlight. During the storage period, if there is sediment in the barrel, it will not affect the use after stirring evenly.
WhatsApp
