&Taiyuan Loctite 569 pipe thread sealant agent dealer Loctite 569 glue

Taiyuan Loctite pipe thread sealant agent dealer Loctite glue product introduction: Loctite glue is used to lock and seal plastic and metal pipe thread joints. The product cures between two closely fitting metal surfaces when isolated from the air and prevents loosening and leakage caused by shock and vibration. Its characteristic is that it does not pollute the hydraulic system and can be used on surfaces with slight oil stains. Fast curing, low strength. It contains no fillers and will not clog valves or filtration systems. Used for sealing and locking (with tapered thread joints) high-pressure hydraulic power systems, tapered threads below 3. Product parameters: Color: Brown Viscosity (.): / Temperature range (℃): - / Pressure resistance (sealing working pressure): ≤, Recommended accelerator: / Relative density:. Usage Guide: .In order to obtain the best results, use cleaning agent to thoroughly clean the internal and external surfaces of the material, and wait until the surface is dry before proceeding to the next step. If the material is an inert metal or the curing speed is too slow, use an accelerator or let it dry 3. Apply one circle of product to the front thread of the external thread. Do not apply one section of thread. Tighten the threads to completely fill the gap. For larger threads and gaps, adjust the amount of product accordingly and also apply a ring of product to the internal threads. Use acceptable experience to install and tighten the fitting until it fits in place. A fully assembled connection has a certain Instant sealing ability, in order to ensure maximum pressure resistance and solvent resistance, ensure that the sealant is cured for at least 1 hour to ensure complete curing. Shenzhen Loctite Glue Co., Ltd. - Henkel Loctite China brand direct seller Company phone number: - Consultation hotline: