Year1
- 型号：
- 5KW
Equipment Features
Two sliding table positions. The operator only needs to put in the product and push the sliding table forward to the end. The machine head will automatically lower, heat, and rise, and the sliding table will exit, completing the entire simple operation process. , staff can use this machine without special training.
. Adjustment of equipment output force: Using a unique low-loss coaxial oscillator, the output force can be adjusted at any time depending on the size of the mold and the thickness of the rubber material, so that it does not interfere with telecommunications when operating a high-frequency machine. , the output adjustment can also be coordinated with the time system, which can maximize the output and fuse the product in the shortest time to increase production volume.
Protection device: current limiting protection. When the output force is adjusted too large, the high-cycle output will be cut off, thus protecting the electronic tubes in the machine from damage due to excessive current. b Spark protection: During the working process, if the mold generates In the event of flashover, the protector will cut off the output, and the mold will automatically rise and leave the product, preventing the mold from flashover and damage. Tight control: During the working process, the high-frequency output can be stopped at any time and the mold can be returned to the original position.
Basic parameters of leather backside coating embossing machine
High cycle output
Power input
Power supply voltage 3 (three phases)
Oscillation cycle rate
Rectifier Silicon diode
Pressure mode foot-operated or pneumatic
Oscillation tube
Fixing plate size
Upper and lower electrode spacing
Mechanical movable spacing
Machine head Shape cross
Mechanical dimensions
Machine weight
Specializing in the production of high frequency machines, high frequency, high frequency heat sealing machines, welding machines, bubble shell welding machines, medical oxygen bag sealing machines, high frequency plastic heat sealing machines machine, high frequency welding machine, high frequency heat sealing machine, bubble shell welding machine, leather embossing machine, folding box machine, film structure heat sealing machine, plastic sealing machine, welding machine, etc. Customers are located in Jiangsu, Shanghai, Shandong, Hubei, Henan, Liaoning, Jilin, Heilongjiang, Anhui, Zhejiang, Dandong, Beijing and other places. Service tenet: free samples, regular visits, quality assurance, one-year warranty, and lifetime maintenance.
Equipment usage., Material plastic welding machine. High frequency heat sealing machine for plastic bags, medical bags, hot water bottles 3. Inflatable toys, air beds, floating exhaust heat sealing machines. Plastic heat sealing machines for car mats, ceilings, and sun visors. .Plastic welding machines for soft film products and soft rubber products. High frequency welding machines for running belts, packing belts, and industrial belts. Plastic bags and bag pedal sealing machines. Blister packaging, blister packaging equipment. Cosmetic packaging, hose plastics Sealing machine. Leather embossing machine. Genuine leather creasing machine. Belt, wallet, ticket clip printing and labeling machine 3. Clothing, shoe upper hot stamping machine. Clothes and hat hot stamping machine. Mat, mat, plastic pad embossing machine. Foot pads , door mats, carpet embossing machines. Anti-slip mats, mouse pads, coaster edge cutting and fusion machines. Environmentally friendly folding box crimping machines.
Mainly using welding machine equipment, high-voltage rectifier self-excited high-frequency electron tubes oscillate to instantly generate high-frequency electromagnetic wave electric fields. The processed plastics and plastic raw materials such as plastics and plastics are welded in the high-frequency electromagnetic wave electric field. The internal molecules generate polarized heat, and a certain amount of pressure is applied to achieve the welding and sealing effect on the plastics and plastic products that need to be heat-sealed and welded.
Basic structure:
】 Mainly adopts double-headed foot-operated pneumatic operation. The operating working positions are divided into left and right workbench panels. The operation mode is mainly used by the operator alternately on the left and right sides.
】 Mainly adopts the rod-stalk operating principle and a powerful machine head. The pressure of the machine head can be adjusted at will, and the corresponding pressure can be adjusted according to the actual requirements of different welding products. The machine head is designed with two linear guide rails for positioning. The machine head will not swing under any circumstances, and the machine head can be accurately selected for the processing of raw materials of the positioning design.
3] The machine head mainly adopts the cross-type installation method of the mold. The mold only needs to be installed in the cross clamp and locked with screws. It is simple and convenient. The main advantage of the cross-type machine head is that the area of the heat-sealed welding product is smaller. Or if it is difficult to position the design-type product for processing, the size of the mold base for installing the template is a 3*3 rectangular tool holder, so the operator can easily find the location of the required heat-sealing welding product.
High frequency, high frequency machine, heat sealing machine, high frequency plastic welding machine, leather embossing machine, clothing fabric embossing machine, electric vehicle seat cushion embossing machine, electric vehicle floor mat indentation machine, carpet embossing machine, Plastic door mat embossing machine, welcome carpet embossing machine, seat leather embossing machine, creasing machine, plastic hard plate embossing machine, plastic bag sealing machine, polypropylene heat sealing machine, etc. and supporting molds.
Principle:
It mainly uses high-frequency and high-voltage ballast to stimulate the oscillation of high-frequency electron tubes to generate high-frequency electromagnetic electric fields. The processed leather material is used to instantaneously undergo molecular changes, and a certain amount of pressure can be used to press out various Round or hexagonal stamping.
Usage:
Motorcycle seat cushion embossing, motorcycle seat cushion embossing, electric vehicle floor mat embossing, car seat cushion cover embossing, leather seat cover embossing machine, plastic floor mat embossing, electric vehicle Backrest cushion embossing, tricycle seat cushion embossing machine, advertising floor mat embossing, etc.
Leather backside coating and embossing machine, features:
. Aluminum alloy heating plate, strong and durable, with fast and even heat conduction and no adhesive film residue.
. The upper film insulation design ensures consistent product quality before and after, and can effectively save electricity when used continuously.
3. The lower film is equipped with a high-temperature resistant silicone pad, which has a wider application range and better processing quality.
. Reasonable structure, low failure efficiency, flexible operation, simple and convenient maintenance.
. Imported components, long service life, stable and reliable performance, and high safety factor.
.The products processed by this machine have clear patterns. The color is uniform and the three-dimensional effect is strong.
It mainly uses temperature control up and down to achieve the effect of leather embossing, leather embossing, leather clothing embossing, and washed leather embossing machines. The molds are cheaply made and leather embossing samples are available for customers to choose, allowing you to be in the industry. In the competition, the fastest victory is achieved. Your victory is our victory. Free on-site installation, maintenance, training and mold making.
Features:
Using solid-state pulse heating control, the temperature can be controlled at will.
The time can be controlled at will, and the time can be adjusted according to the thickness of your fabric
It is controlled by semi-automatic operation. Control mode: manual button, automatic foot pedal. The specifications of the countertop can be customized according to customer needs
and different embossed mold plates can be installed. The installation is convenient and simple.
Manager: Manager Wang Yong Business: (Marketing Department)
Ningbo Yongyuan: Market-oriented and management-focused - obedience is the purpose
Customer Service: Manager Du Yongyuan Delivery: ( Customer service)
Company: Name Ningbo Yongyuan Technology Contact number - (after-sales)
Du customer service: - Sincere cooperation, mutual benefit and common development
WhatsApp
