The specific uses of stamping parts, [Double Eleven hot e-commerce is definitely Dezhou Xianglu stamping parts

The specific use of stamping parts, [Double Eleven hot e-commerce is undoubtedly Dezhou Xianglu Stamping Parts. Stamping parts are produced in large quantities. If the stamping process can be used, production efficiency will be greatly improved and production costs will be reduced. Material: The material of this stamping part is 3, carbon steel, which has good stamping performance. Stamping parts are a forming processing method that relies on presses and molds to apply external force to plates, strips, pipes and profiles to cause plastic deformation or separation, thereby obtaining workpieces (stamping parts) of the required shape and size. The blanks for stamping are mainly hot-rolled and cold-rolled steel plates and strips. Stamping and forging both belong to plastic processing (or pressure processing), and are collectively called forging. Dimensional accuracy: All dimensions without tolerances on the part drawing are free dimensions, and the dimensional tolerance of the workpiece can be determined by grade. It can be seen from the parts diagram that the dimensional accuracy of this stamping part is average, and ordinary blanking can suffice. Check the standard tolerance table and find that the tolerance of each dimension is hole spacing B. Part appearance and part inner shape. Conclusion: This stamping part is suitable for ordinary blanking. Part structure: The structure of this stamping part is moderately complex. The corners are arc transitions, the distance between the hole and the edge of the workpiece is larger than the minimum wall thickness, and the minimum hole diameter Φ is larger than the minimum punching size Φ, which is more suitable for punching.