Botou cold storage special extruded board exterior wall insulation board xps extruded board Huamei extruded board manufacturer

Botou cold storage special extruded board exterior wall insulation board extruded board Huamei extruded board manufacturer 3 The insulation board is an extruded polystyrene insulation board. It is made of polystyrene resin as raw material plus other raw and auxiliary materials and Polymer is a rigid foam board made by heating and mixing while injecting a catalyst, and then extruding it. Its scientific name is extruded polystyrene foam for thermal insulation (abbreviation), and it has a perfect closed-cell honeycomb Structure, this structure allows the board to have extremely low water absorption (almost no water absorption), low thermal conductivity, high pressure resistance, and aging resistance (almost no aging and decomposition during normal use). Scope of application: building roof insulation, steel structure Roofing, building wall insulation, building floor moisturizing, square floor, ground frost heave control, central air conditioning ventilation ducts, etc. The advantages of the system are: ). The board has a dense surface layer and an inner layer of closed cell structure. Its thermal conductivity is much lower than that of the same thickness, so it has better thermal insulation performance. For the same building exterior wall, its thickness can be smaller than other types of insulation materials. ), due to the closed-cell structure of the inner layer. Therefore, it has good moisture resistance and can still maintain good thermal insulation performance in humid environments. It is suitable for buildings with special requirements for thermal insulation such as cold storage, and can also be used for buildings with exterior wall facing materials made of bricks or stone. Sales phone number: Contact person: Manager Gao