Shangqiu rainwater recycling system manufacturer is good

The technology is scientific, reasonable, simple and effective, and can effectively collect rainwater above the required site. The rainwater processed through our patented rainwater standpipe discard filtration device can be collected directly into the water storage tank. It can effectively remove the heavily polluted rainwater in the early stage of rainfall, and at the same time filter the later rainwater so that it can be used after collection. ?Rainwater is stored in the water tank and can be reused after simple filtration and disinfection. ?The reused water quality can meet the needs of toilet flushing, car washing, greening watering, landscape water replenishment and other places where miscellaneous water can be used. ?The system occupies a small space and has little impact on the building itself, making it very suitable for installation. Advantages of this system: Different rainwater collection processes are targeted and can effectively handle rainwater from different catchment surfaces. It can not only effectively collect rainwater, but also reasonably save costs. It takes into account the system's rainwater pretreatment, rainwater storage, rainwater deep purification, rainwater supply, water replenishment and system control, making it comprehensive and scientific. Using a large number of new patents, professional devices and materials, we can easily solve special problems in rainwater collection, such as drainage, water storage, water supply, etc. In the collection design, the use of electrical equipment should be avoided as much as possible, and the characteristics of rainwater gravity flow should be used more to complete the automatic discharge, purification and collection of pollutants to achieve the characteristics of true energy saving, environmental protection, long service life and low cost. The entire system is controlled by a patented rainwater controller independently developed by our company to complete functions such as collection, purification, water supply, water replenishment, and safety protection. , Advantages in Products Advantages In terms of rainwater collection products, our company attaches great importance to the development, promotion and patent application of rainwater products. Some products have obtained national patents and have been marketed and sold at the same time. Technical advantages: Our company already has - years of product experience and market experience in rainwater collection. It can complete the design of different forms of rainwater collection, and has product supply, good installation and commissioning, and after-sales one-stop services. The characteristics of our company's rainwater system are that it saves land and does not take up space. ,, Water storage modules can be stacked into different shapes, so that the construction of water storage tanks can be more dispersed and flexible. For example, water storage tanks can be built along roads or used for drainage of large areas. Construction and installation are simple, which can greatly reduce the construction period and improve efficiency. The working principle of the rainwater discarding filter device: before the initial rainwater - generally the pollution is serious and the flow rate is relatively small. When flowing through the initial discarding filtering device, due to the effect of gravity, it will first be discharged through the low-open sewage pipe. After the rainfall increases, the float located at the upper end of the sewage pipe will close the sewage pipe under the action of water flow pressure, and the rainwater will be forced to flow to the outlet pipe. After the rain stops, as the rainwater stored in the device decreases, the float will automatically reset. Thereby completing the abandonment effect. A stainless steel filter is installed on the outlet pipe to pre-filter the rainwater. The dirt left by the filter will be washed away through the sewage pipe during the next rainfall. This enables multiple functions such as initial rainwater disposal, filtration, and automatic sewage discharge. The working process of the mechanical waste filtering device: When the rain starts in the early stage of rainfall, the rainwater flow is small. At this time, the rainwater with serious pollution in the early stage is directly discharged from the open sewage outlet at the lower end. After the rainfall increases in the middle period of rainfall and reaches the set rainwater flow rate, the lower sewage outlet is closed by the control ball, the sewage outlet stops draining, the liquid level in the center rises, and the rainwater flows out from the collection outlet after being filtered by the white filter mesh. After the rainfall ends, within a period of time after the rainfall ends, the rainwater retained in the device will become less and less. When the liquid level drops to a certain level, the control ball will rise, the filtered garbage and remaining rainwater will be discharged together, and the device will return to its initial state. Product Features: Built-in grille net can effectively intercept sewage without causing blockage, and can realize automatic sewage discharge. The amount of rainwater discarded can be adjusted through an internal lever. The set of devices automatically adjusts the flow of rainwater without requiring a power supply or any electrical device, and has high reliability and stability. The material is high quality and stainless steel, and its service life is much longer than that of electric devices.