1. This machine adopts full PLC control system and touch screen human-machine interface.
2. The conveying section is equipped with an automatic coated LOW-E glass detection device, which can identify the film surface of the glass
3. The cleaning machine is equipped with three pairs of wool Brushes, the first pair of hard-bristled brushes can clean ordinary glass, and the last two pairs of brushes are high-temperature nylon filament brushes, which can clean coated LOW-E glass
4. The fan is a 15KW high-pressure fan, equipped with a soundproof box, heating system and circulating air system.
5. The water system is circulating water and is equipped with a heating device. (Water treatment equipment is optional)
6. This machine can process double-layer and triple-layer insulating glass, as well as single-sided and left-right staggered insulating glass. Equipped with movable positioning device.
7. Can process large and small pieces, curtain wall insulating glass (this function is internal sheet processing technology, optional)
8. Plate pressing It has central pressure and function, and has the function of opening for maintenance.
9. Conveying section type 07C or turning table type 07F (optional). The conveying section can be connected to an automatic gluing line, and the turning table can realize parallel movement of large glass.
10. The pressing system of the whole machine is hydraulic station pressing.
11. This machine can process 60 to 120 pieces of finished glass per hour based on the size of 1000mm*1000mm double-layer insulating glass.
2. Main structural features:
1. The cleaning section of this machine is an all-rubber transmission roller with no frequency conversion. Level speed regulation.
2. Independent brush motor, high-speed oil-free lubricated bearings.
3. The water spray system is an adjustable nozzle, the water spray shape is fan-shaped, and the angle is adjustable.
4. The light inspection section, aluminum frame positioning section, outer closing section and positioning beam motor are all controlled by frequency converters to operate at high and low speeds.
5. The plate pressure movement is a tie rod type, and the four-corner gear and rack positioning motion system ensures stable pressing with small errors. PLC mode controls center positioning and pressing.
6. The reversible transmission section is controlled by a hydraulic cylinder, making it stable and safe.
Three. Technical parameters
Maximum processing size: 2200*3200(mm) \ 2500*3400mm
< p> Minimum processing size: 450*280(mm); Maximum thickness of insulating glass: 3—12(mm)
Cleaning speed: 2-6m/min (winter) 2-8 m/min (summer)
Air source pressure: 0.6—0.8Mpa
Dimensions: 23000*2000*2700(mm) Two-component glue applicator , Insulating glass equipment. Butyl coating machine 15165110497
WhatsApp
