Flat pressing, automatic inner closing) high configuration ZK18BZ—JC (C)
1. Main performance features: ; ;
1. This machine adopts full PLC Control system, touch screen human-machine interface.
2. The main machine includes a loading section, a cleaning and drying section, a light inspection section, an aluminum frame positioning section, and a section, and a flipping output section
3. Conveyor section equipment The automatic coated LOW-E glass detection device can identify the film surface of the glass
4. The cleaning machine is equipped with three pairs of brushes. The first pair of hard brushes can clean ordinary glass, rear glass, etc. Two pairs of brushes are high-temperature nylon filament brushes, which can clean coated LOW-E glass
5. The fan is an 11KW high-pressure fan, and Equipped with soundproof box, heating system and circulating air system.
6. The water system is circulating water and is equipped with a heating device. (Water treatment equipment is optional)
7. This machine can process double-layer and triple-layer insulating glass. It can process large and small pieces and curtain wall insulating glass.
8. The plate press is equipped with 23 sets of point-to-point suction cups, switches, vacuum generators, double-layer glass auxiliary lifting devices, and has the function of gear and rack positioning and synchronous opening for maintenance.
9. The flipping table can realize parallel movement of large glass.
10. The pressing system of the whole machine is hydraulic station pressing. ;
11. ; This machine can process 400 to 800 pieces of finished glass per hour based on the size of 1000mm*1000mm double-layer insulating glass.
2. Main structural features:
1. The cleaning section of this machine is an all-rubber transfer roller, stepless Speed.
2. The bearing at the bottom of the cleaning box adopts high-speed oil-free lubricated bearing.
3. The main box of the cleaning section is all made of stainless steel.
4. The water spray system is a double water pump and double water tank circulating water circuit.
5. The light inspection section, aluminum frame positioning section, and closing section motors all operate at high and low speeds controlled by inverters.
6. The plate pressure movement is a tie rod type, and the four-corner gear and rack positioning motion system ensures stable pressing with small errors.
7. Reversible conveyor section, oversized glass can be transported flatly.
Technical parameters
Power supply: 380V 50HZ
Power: ; 20.85KW
Maximum processing size: 2500* 1800(mm)
Minimum processing size: 450*280(mm)
Maximum thickness of insulating glass: 3—12(mm)
Cleaning speed ： 2—6m/min
Air source pressure: 0.6 0.8Mpa
WhatsApp
