Dangyang, a municipality under the jurisdiction of Yichang City, is located in the central part of Hubei Province, adjacent to the Three Gorges Yichang in the west, the ancient city of Jingzhou in the east, and Longzhong Xiangyang in the north. In the year and month, the county was removed and a city was established. It has jurisdiction over 1 town and 3 sub-district offices, with a land area of square kilometers, 10,000 acres of cultivated land, and a total population of 10,000 people. The government residence is located at No. Zilong Road, Dangyang City.
Shale crusher is a crusher with two rotors and a dual-power crushing principle. After the material enters the crusher, it is crushed twice and then comes out directly from the discharge port. The discharge port is set There is no screen bottom device, which greatly improves the moisture content requirements of the crushed materials, so that problems such as blockage will not occur during the crushing process.
Shale, shale is a kind of sedimentary rock with complex composition, but all have thin sheet-like or lamellar joints. It is mainly a rock formed by clay deposition under pressure and temperature, but it is mixed with quartz, feldspar, etc. stone fragments and other chemicals. Due to this characteristic of shale, it has become a good raw material for making bricks in brick factories. Most brick factories now use shale to make bricks. Of course this is just one of the uses.
Shale crusher is improved on the basis of traditional hammer crusher, so the structure is the same as that of hammer crusher, consisting of frame, rotor, lining, hammer head and other parts. The material is driven by the wheel, and the material is crushed due to the impact of the high-speed rotation of the rotor and the impact of the hammer head on the crushing plate. The frame is divided into two parts: the upper body and the lower body. The machine cavity is equipped with a wear-resistant protective lining to protect the wear and deformation inside the body. The rotor consists of a rotor shaft, a middle disk, an end disk, and a hammer shaft. , hammer head and other parts.
Since the structure of shale crusher is the same as that of hammer crusher, the working principle is also the same. Driven by the motor, two sets of rotors connected in series rotate at high speed at the same time. The material passes through the upper rotor in the inner cavity of the machine. The crushed materials are immediately crushed again by the hammer head of the rapidly rotating lower rotor. The materials in the inner cavity collide with each other rapidly and crush each other to achieve the effect of hammer powder and powder, forming cinder particles with a discharge particle size of less than 3 mm. This particle size can fully meet the requirements of brick and tile
manufacturers for internal combustion brick making.
Zhengzhou Mingde Mining Machinery Manufacturing Co., Ltd.
Address: 200 meters east of the highway intersection, Gongyi City, Zhengzhou, Henan Province