Lianjiang Class A fireproof film manufacturer, Lianjiang frameless light box manufacturer

Lianjiang-level fireproof film manufacturer, Lianjiang frameless light box production Soft film ceiling is a new type of decoration material that is commonly used in decoration. The installation process of light-transmitting film is as follows:
- Base treatment: soft film The ceiling needs to be installed on the basis of a well-made chassis. The chassis can be made of wood, square tubes and other materials. The width of the contact surface between the chassis and the special keel is required

- cm
,< br/>-Other requirements: The chassis must be installed firmly
,
-No looseness. Ceiling lighting fixtures, fire protection, etc. have been processed. If conditions permit, a layer of latex paint can be painted on the original ceiling to prevent dust from falling.
- Pre-processing of soft film materials: Strict installation drawing requirements, cutting, welding, etc. of soft film materials. The overall color of the soft film is required to be consistent in batches and welding without gaps.
.3
- Installation of special soft film keels: Based on the completed chassis, fix the special soft film keels in strict accordance with the drawing requirements. The keel fixing method changes with the chassis material, and gun nails can be used , rivets, etc. The keels must be installed flat, and the seam between the two keels must be less than
-.
- Soft membrane installation: Install the soft membrane on the basis of the special keel. Strictly follow the drawing requirements. The soft membrane should be installed flat and consistent in color. All soft membranes should be installed tightly. For areas with specifications exceeding
- meters, hot air blowers should be used to soften the film, and then tightened to ensure that the soft film is smooth and consistent after installation. The distance between the lamp and the film should be ensured to be
-cm. All fire and downlights that require empty holes must be drilled in advance.
. :