- 规格：
- Φ18-89
- 材质：
- 碳钢
- 压力范围：
- 31.5Mpa
污水处理站液压系统用承插式高压焊接管接头 承插式液压三通管接头
承插式焊接接头 插入焊接接头 船用承插式焊接管接头 污水水处理站液压系统用焊接式管接头 污水处理液压系统用承插式焊接头 锚机液压系统用承插焊接头 电站液压系统用焊接式接头 自动输送带液压系统用焊接式接头
一、概述：
承插式插入焊接接头，是液压管路上常用的液压焊接式接头，在钢管之间起连接作用，具有连接简单、能承受高压，牢固美观，密封性好，直接将钢管插入到接头里面，然后焊接起来，耐高压、抗振动，特别适合一些焊接后不拆卸的管路，可以通过气、液、油介质的管路系统。
二、主要规格：可以焊接钢管外径18-90
三、公称压力:31.5MPa
四、适用介质:液压油、水,蒸汽,石油等
五、材料:碳钢、不锈钢
六、连接形式:承插焊连接
七、承插插入式管接头执行标准：JB3878.1-85插入焊接式直角管接头；JB3878.2-85插入焊接式三通管接头；JB3738.3-85插入焊接式四通管接头；JB3738.4-85插入焊接式锐角管接头；
JB3738.5-85插入焊接式变径直通管接头；JB3738.6-85插入焊接式管封头；JB3738.6-85插入焊接式直通管接头
Disclaimer
The information/pictures/parameters, etc. displayed on this webpage about【Socket-type high-pressure joints for sewage treatment station hydraulic systems Socket-type hydraulic tee joints】are provided by member【Guangzhou Two-way Mechanical and Electrical Equipment Co., Ltd.
】，By Titker Trade Network members 【Guangzhou Two-way Mechanical and Electrical Equipment Co., Ltd.
】is solely responsible for the authenticity, accuracy and legality of the information/pictures/parameters, etc.，Titker Trade Network only provides display services. For your safety, please choose Titker Trade Network for online trading, otherwise Titker Trade Network will not bear any responsibility for this.
If your legitimate rights and interests have been infringed, please contact Titker Trade Network customer service as soon as possible. We will serve you wholeheartedly. Thank you for your attention and support to Titker Trade Network!
Year1
WhatsApp
